Looks like you access from European region.
Would you shop at webike.eu.com?
9.38 USD (1,495 JPY)
Delivery Information
Please select product form first.
[Type] 74-degrees Valve
[Size] Corresponding Wheel: Φ11.5 (It correspond to STD wheel.)
[Included Parts] Aluminum Cap
Ideal air injection has been achieved by arising bulb slightly from 90 degrees to 74 degrees. The material is aluminum and has light weight.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Aug 2, 2020
It makes it easier to get air in.
The OEM Valve is a straight I-shaped Valve, so the Air gauge interferes with the Wheel when adjusting the air pressure, which is quite stressful.
I replaced it with an L-shaped Valve to get rid of that Stress. No Stress when measuring the air pressure, and the time is shortened.
Jun 21, 2020
I bought this for the spout of the Brake fluid I bought with it
Just drill a hole in the lid of the brake fluid and put a valve cap on it!
Surprisingly, you often overfill the Fluid when you pour it in, or fail to pour it out ?
This is where the Valve cap comes in It is possible to
It's not for Fluid, so I'm not considering it to melt or anything
If you're going to experiment, do so at your own risk!
There were various other Valve caps, but with Color, it is clear that the color fades I chose Silver because I thought it would be a good choice
Also, Valve is available from various manufacturers, but you can trust I chose this one because it is a manufacturer
I'm not sure if it's the right way to use it and I don't know if I can rate it, but I'm pretty happy with it
Jun 10, 2020
Tire replacement with a replacement Recommendation!
I have installed them on every motorcycle I ride It makes it easier to get air in and, like the RubberValve, it's degraded and leaking air, almost like the RubberValve It is safe to use because there is no
A thin layer of Silicon grease is applied to the rubber parts when tightening It is
May 27, 2019
It makes it easier to get air in
It is used for ZX9R It's easy to change the angle and put air into it There is a similar one in the other company's product, but I like the fact that I can get a replacement Rubber It is very easy to put air into the Scooter It will save you from the hassle (laughs)
View DetailJan 27, 2019
even for Vehicle's Inflator is a piece of cake!
I use GasSTAND's Inflator in my neighborhood a lot, but
Before I knew it, the only thing that was left was the Straight shape
It's very hard to get in with the DAX's strait-laced Air Valve! It was
So, the CB400SB has this product installed from the time of purchase
We decided to introduce it to the DAX
If it's time to replace the Tire, it's easy to assemble it
I mean, there's still a lot of gaps between us..
At my regular motorcycle shop How much will it be? I asked him
I'll give you $2,000 for the front and back! So I asked for it immediately
And it looks good in frosted black
What's more, it's not 90-degrees, it's a bit angled, which is very easy to use!
I recommend it!
Review detail
