Looks like you access from European region.
Would you shop at webike.eu.com?
1,992.25 USD (317,594 JPY)
Webike Point: +3176 pt
(19.92 USD)
Delivery Information
-
Please select product form first.
FITMENT
KAWASAKI
Open Fit Model Information Table
-
Z2 (750RS/Z750FOUR)
-
Z1
-
Z1000 MkII
-
Z750FX 1
See all
KAWASAKI
Product detail
Material:
・Silencer: Titanium
・Exhaust Pipe: Titanium
Exhaust Pipe Specs:
・Up-type
・Collection Method: 4-in-1
・Tail Pipe Outer Diameter: Φ60.5
・Exhaust Pipe Diameter: Φ42.7
・Surface Finish: Half-polish
Set Contents:
・Collector
・Tail pipe
・8 Springs
・Silencer
・End baffle
・Silencer band
・Silencer stay
・Exhaust pipe set (for one vehicle)
・Flat filter cover & drain kit
Maintenance Data:
・Drain bolt: Requires removal of collector
・Oil filter replacement: Requires removal of collector
・Center stand: No
** Not JMCA certified.
* Exhaust systems without JMCA certification may not be suitable for vehicle inspection or public road use.
* End baffle is pre-installed in the silencer at the time of shipment.
* Conical Titanium Silencer V-1/V-2/V-3 models include a welded stay; therefore, a silencer band is not included.
* Never remove the noise-reducing baffle equipped in NITRO RACING silencers. It is recommended to periodically inspect and overhaul the internal silencer wool.
* Grenade Titanium Silencers are mounted using a Φ90 silencer band.
* Requires conversion to a single-type rear set. When replacing the stock system with this product, cutting the frame at the tandem step section is required.
* For vehicles already equipped with the NITRO RACING Tandem Step Bracket KIT Type 1, the upper part of the silencer may interfere with the kit depending on the welding position of the mount plate. Use of the Tandem Step Bracket KIT Type 2 is recommended.
* Depending on the type of turn signal, interference with the silencer may occur. In such cases, replacement of the turn signals is required.
* The oil filter cover and drain bolt must be changed to a flat type. The flat cover & drain kit is included with this product and must be installed during exhaust assembly.
* The exhaust stay is not compatible with the stock rear suspension mount. Compatible with lay-down mounts using M6 screw holes.
* Designed for JDM. International street-legal compliance not guaranteed..
* The image is only for reference. The image shown may differ from the actual product.
A new proposal for NITRO RACING Z-series exhaust systems.
Features a short tail design that combines a spartan look with compactness.
Beyond its aggressive appearance, performance is thoroughly pursued based on feedback from the racing field.
By including a dedicated flat filter cover, the exhaust layout is positioned as close to the vehicle body as possible, and the collector is shifted toward the center, ensuring bank angle and sufficient ground clearance for circuit riding.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
