Looks like you access from European region.
Would you shop at webike.eu.com?
236.16 USD (37,648 JPY)
Webike Point: +1882 pt
(11.8 USD)
Delivery Information
This item is discontinued.
FITMENT
HONDA
Open Fit Model Information Table
-
SUPER CUB 50
(C50-0800001-)
-
SUPER CUB 50
(C50-2100001-)
-
SUPER CUB 50
(AA01-1000001-1699999)
-
SUPER CUB 50
(C50-0200001-0573585)
See all
HONDA
Product detail
[Function]
Speedometer (199km / h, correction range: 50%-210% compared to stock)
Maximum speed record (resettable)
Electric tachometer
Digital step type (unit: 500rpm-15000rpm)
Digital Numerical Expression (Unit: 100rpm-19900rpm)
Maximum RPM record (resettable)
Odometer (mileage)
Trip meter (Erasable mileage)
White LED backlight (with 5-step brightness adjustment function)
Fuel warning light (for Little Cub (FI))
*[Cautions for use]
■[Prohibition of riding with headlights off / racing with security parts removed]
If a bike whose headlights are always on is riden with the lights off due to simple modification (just disconnecting the wires), the unconsumed power will increase the voltage of the entire bike.
If you continue to ride the bike as is, the battery may deteriorate due to overcharging or the stock regulator may fail due to excessive strain.
The adverse effect is stronger in the case of the engine modification which runs at a higher engine speed than stock.
If the headlight has gone out stop riding immediately, or switch to high beam (and adjust the optical axis) if it is necessary to ride.
At this time, ride at low rpm as much as possible.
Removing all security parts from a race bike requires specialized knowledge and replacement or additional parts.
■Do not install aftermarket H.I.D. kits, or LED headlights or fog lamps made by other companies at the same time.
Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction.
■Do not install an aftermarket ignition system, ignition coil, plug cord, or racing plugs (non-resistor type), as they may cause a malfunction due to an increase in adverse noise.
Deterioration of ignition system components is also related to increased ignition noise.
■Do not install an aftermarket power generator because it may cause a drop in battery voltage due to insufficient charging power or malfunction of control voltage, which may result in failure or damage.
*The blue indicator light is used for different purposes depending on the model.
*This product cannot be installed on Super Cub 50 Super Custom series due to the different shape of the stock meter.
*Super Cub 50 (FI) (AA01-1700001-) is excluded from the compatible models because there is no reason to use the blue indicator lamp and wiring modification is required.It is possible to install it if wiring is done.The wiring method is described in the instruction manual.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
■Details
This LCD meter is equipped with a speedometer, tachometer, odometer and trip meter in a compact space.
In addition, the maximum speed record, maximum RPM record, and fuel warning display (when equipped with Little Cub (FI)) functions have been added to create a highly functional meter that is packed with SP Takegawa's attention to detail and ingenuity.
Equipped with features for custom vehicles
Speed correction function (50%-210% of stock) that can correspond to the detailed setting of the tire size change and the wheel size change, and RPM signal reading function with high versatility that corresponds to the reading of the pulse generator signal that has little influence on the custom parts of the ignition system in addition to the primary side and secondary side of the ignition coil are equipped.
Comfortable operation with external switch
The switch that is necessary for switching the meter's function display and checking records is a separate type, which makes it easy to operate the switch when switching, and can be installed on the back of the handlebar cover.Lightweight and compact, it can be easily installed with the included adhesive tape.
New control circuit built-in
Wide stable operating voltage range (DC / AC 8-16V) and new control circuit for temporary overvoltage (18V / 1 hour, 24V / 1 minute) are built in.
Machined aluminum meter bracket (with indicator lamp)
The meter bracket is made from machined aluminum and allows for bolt-on installation of the D-type meter.
Green, red and blue indicator lamps are placed on the meter bracket, and the warning lamps can be used as stock.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
