Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
102.47 USD (16,336 JPY)
Webike Point: +163 pt
(1.02 USD)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Product detail
[Rated voltage] DC12V
[Outer dimensions] W25.5mm x H30.5mm x D15.5mm (excluding protruding parts)
[Component parts]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction Manual, Warranty Card
・Accessories (varies by kit)
[Working time] Approx. 30 min
**When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All models that have been checked for compatibility are stock models.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Model-specific kits with all necessary parts
Coupler-on installation is easy!
Dedicated setup!Gear position data already registered!
The special harness is connected to a 16P harness coupler behind the meter and an ignition coil located under the horn in the air shroud on the right side.
■Easy installation with the special harness!
It can be installed easily without soldering because it uses a special harness for each model.
The model-specific harness has a 12V (+) service terminal for easy installation of the CS-550 burglar alarm.
■Compact design!
The main unit dimensions are W25.5mm x H30.5mm x D15.5mm (excluding protruding parts), a compact design that does not interfere with installation around the meter.
■LED display for high visibility!
Equipped with a dimmer sensor [automatic dimming function].
The brightness of the LED is automatically adjusted to be brighter in the daytime and darker at night to improve the visibility of the digital numerals.
■Equipped with a shift up indicator!
Since the rpm can be set arbitrarily, it can be used for everything from narrowing to preventing over-revving.
The blue LED will light up when the rotation is higher than the set value.
You can re-register as many times as you like.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
