Looks like you access from European region.
Would you shop at webike.eu.com?
75.14 USD (11,978 JPY)
Delivery Information
If manufacturer have in stock, ships around 1st Jul. 2026
FITMENT
-
TLR200
-
TL125
J(JD06)
-
TL125
D(JD06)
-
TL125
H(JD06)
See all
HONDA
Product detail
・Clutch PlatesQuantity:1 Set of 4pcs. Quantity with groove cut and chamfered on:1 Set for 1 Vehicle
**Even if the "thickness of the friction disc" is within the manual's specified value when replacing the plate, if the cork grains are so black and carbonized that they cannot be distinguished, it is the "end of life". When you put your fingernail on it, you will feel a crunching sound, and it is not cork (friction material) but charcoal with little friction force.
*The image may contain other products.
*Please note that the product specification may change due to manufacturer reasons.
.
Clutch PlatesQuantity:1 Set of 4pcs. Groove cut and chamfered on Quantity:1 Set for 1 Vehicle.
0In the case of this car model
The change of Touch by the riding time and situation is Large.. (Heat Dare)
It is effective in improving such things as.
Plate with groove cut and beveled surface is more precise and flatter, so there is less distortion (rattling, sagging) of the oil accumulation, but the groove holds the oil (half cut), so that the oil is always stable "no matter how it is used".. It is one of those funky ideas for you!
SPLifter Plate is an effective countermeasure against drag and judder (wobbling connection).. Suppresses abnormal vibration of the clutch and makes the connection smooth..
・YZetc. In the grooving and chamfering of Racer and TRIAL for Vehicles, the clutch is soaked in oil, so it is cut completely (end to end) to facilitate lubrication.. Processing to cool down by discharging more and more. Half-slice" and "full-slice" serve completely different purposes.. When I tested a full cut like YZ on SEROW, it got burnt immediately!.
[Image description]
Image 1. Quantity:1 Set of 4pcs. Quantity:Set. The structure improves surface accuracy and retains the oil..
Image 2. Immediately after a hard test. Holding Oil. Discolored, but good with little distortion and wear.. In this state, Friction Disc can be used continuously.. (The image is of another car model.. )
Image 3. Grooving and chamfering was one of the elements of "ClutchTuning" to machine ClutchBody.. The effect of processing Plate is also Large and so it is one of the Items.. The clutch spring retainer is different from the clutch spring retainer in that it works differently.. (Image:RTL-F)
Image 4. As written on the packing bag, when assembling, please assemble with the rounded corners on the reverse side on the Engine side..
This processed product does not depend on the friction force and connection by the surface roughness of the clutch plates when they are new (early GSX400EGSX400E)..
The surface roughness and contact area are increased by chamfering, and the surface pressure is increased by groove cutting, etc.. The frictional force is obtained by.
This type holds oil in the groove and reduces heat generation.. It is one of those funky ideas for you!
It is flat and smooth because it is beveled..
Since there is little change in the reduction, the change in Touch will be less in the short and long term..
Normally, Friction Disc and Clutch Plates must be replaced at the same time, or they will start slipping quickly..
Although the name "groove cut chamfering plate" is used, it is correct to say "chamfering to flatten the distortion of new parts by beating or bending", groove cut, final BALI removal chamfering..
Processed by hand in our workshop.
[We have not been able to confirm the number of sheets used, but it appears that the following models are also used. ]
・NSR50
・NS50F
・CB125T
・CR80R
・CRM50
・XR100MOTARD
・CRF100F
・XL200R
・XR200R
・NX125
・NSF100
・XR100R
・CD90
・XL125S
・REBEL250
・CG125
・XLR125R
・MT50etc.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.