Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
81.3 USD (12,960 JPY)
Webike Point: +130 pt
(0.81 USD)
Delivery Information
In Stock, Ships within 48 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
GYRO CANOPY
(2BH-TA03-1200001-)
-
GYRO CANOPY
(JBH-TA03-1100001-1199999)
-
GYROX
(2BH-TD02-1200001-)
-
GYROX
(JBH-TD02-1100001-1199999)
Product detail
Hose Mounting Screw Pitch:0.1kg
**TD02/TA03 models with a frame number older than the number listed for the applicable model are not compatible because they are not equipped with a speed speed sensor.
*This product only removes the limiter by the "speed sensor limiter".
*The engine speed limiter will not be released. Due to the deterioration of the drivetrain of your motorcycle, the engine speed limiter may be activated and the maximum speed may not be improved, which is not a problem of DILTS JAPAN products.
*Data on new vehicles:.
Remove the speed sensor => ECU error occurs and the speed is controlled at 7500rpm/speed is only below 40KM/h.......
Full normal (new car) ⇒Engine rpm approx. 8400rpm 55km/h (Only rpm rises from this point when the drivetrain is worn out.)
The engine speed will be increased by the engine condition and weight.
*If you want to cut both 9000 rpm engine limiter and 55 km/h speed limiter, please use ENIGMA sub-computer. One-touch coupler-on type is also available for easy installation.
*Speed Enhancer II does not cancel the engine rpm limiter (9000 rpm rev limiter), so the engine rpm rises up to 9000 rpm, but not beyond that.
*If you want to cut both the 55 km/h speed limiter and the 9000 rpm rev limiter, use DILTS JAPAN ENIGMA. The engine speed can now be used up to 10,000 rpm or more, allowing the driver to increase the speed to the limit. Also, since it has a tachometer function, you can easily check the drivetrain for sagging, etc. (Check example). (Checking example => In normal condition, 55km/h at 8400-8500 RPM, but if the drivetrain is worn out, 55km/h at 9000 RPM.) Since there is also a function for increasing/reducing fuel and a water temperature gauge, engine performance can be greatly improved.
*It contains other products in the photo.
*Please note that the product specification may change due to manufacturer reasons.
*Warning*.
This product is intended for use in competition and racing.
Use of the product is entirely at the customer's own risk, from installation to use.
DILTS JAPAN is not responsible for any damage. If used improperly, it may cause serious damage to the engine.
DILTS JAPAN shall not be liable for any damage caused by the act of a third party who installs the product or other accidents, or by the intentional or negligent misuse of the product by the customer.
DILTS JAPAN shall not be liable for any incidental or consequential damages arising out of the use or inability to use this product.
.
Easy installation with CouplerON!
New type for Second Model (2BH type)
This is a speed limiter cut to unlock the "Speed sensorLimiter" attached to the GYRO system and increase the maximum speed..
This is a new model that is compatible with the 2BH model (model with a new ECU) after the gas emission regulation, which was previously only compatible with the JBH model..
Compatible with the FrameNOs listed under Compatible Car Models.
The 4-stroke GYRO system has a dedicated speed sensor installed in the engine, and the limiter is activated when the maximum speed reaches 55 km/h by ECU control..
(If the Speed Sensor is removed, the ECU makes an error and further controls the Speed to slow down.)
The Speed Limiter is a dedicated speed sensor that is independent of the Speedometer, so the Speed Limiter is activated at 55 km/h regardless of the Meter's speed display or engine RPM..
For this reason, even if the High Speed Pulleyetc.. Even with the installation, the maximum speed is controlled at 55 km/h.
This product solves these problems by simply removing the coupler of the speed sensor attached to the GEAR part of the engine and interrupting it by turning the coupler ON, thereby only disabling the limiter by the speed sensor..
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
