Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
100.77 USD (16,065 JPY)
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MONKEY
09
-
MONKEY125
17-22
-
CT110 HUNTER CUB/CT125
20-23
-
CROSSCUB110
13-18
See all
HONDA
-
FXDL
08
-
XL1200X
10
-
FLST
03
-
Universal
Product detail
9000rpm display
Color: Black rim / Black body
Φ45 body
3-color LED lighting
Installation Width: 33mm
Digital voltmeter
Maximum speed memory function
Shift up warning lamp
Installation time: 2.0h
With opening function
Spherical lens
Backlight color switchable among 3 colors (white, blue, orange)
Resistor harness included
[Compatibility confirmed models]
・MONKEY(09), XL1200X(10), FXDL(08), FLST( 03)
Pulse generator (92333) installed at the same time
・SR400( 78-18), KLX250ES(94)
Simultaneous installation of resistor harness
GB350/S (21-23) , CL250/500 (23) , DAX125 (23) , Monkey 125 (17-22) , Cross Cub 110 (13-18) , Rebel250 (17-23) , Hunter Cub (20-23)
**Requires separately sold anti-vibration meter bracket.
*Wiring modification is required for installation.
*Since this is a universal product, it may not operate normally even if the installation conditions are met.
*Fits bikes with full transistor, CDI ignition and 12V DC battery.
*Not for bikes other than point ignition bikes, 6V bikes, 12V AC bikes, and motorcycles.
*The response speed of the tachometer is slow to prevent vibration.
*It is not completely waterproof.
*Depending on model, a separately sold pulse generator (Part No.: 92333) may be required.
*Be sure to install the separately sold anti-vibration meter bracket at the same time.
*If it is next to the engine, the direct vibration and heat from the engine can damage the internal electronic components.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Needle type electric tachometer.
Φ48's tiny stainless steel body specification.
Compact tachometer with thin body and spherical lens.
The body does not protrude too much, making it suitable for adding or replacing meters without affecting the balance of the overall design.
It picks up pulse signals from ignition coils and plug cords, and can be installed on a wide range of bikes regardless of engine type or displacement, as long as the bike has a stock full transistorized & CDI ignition.
A resistor harness is included, allowing installation in bikes where pulse pickup is normally difficult.
●Sub-motor can display voltmeter and maximum rpm memory
●Thin stainless steel body with spherical lens
●Three backlight colors can be switched (white, blue, orange)
●Resistor harnesses are included to accommodate bikes with unstable meters
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.