Magnesium Forged Wheel M7R Genesi

■Standard collar F/R set
[front]
・Size: 3.50-17
・Weight: No Data

[Rear]
・Size: 5.50-17
・Weight: No Data

[sprockets]
・Compatibility: Type A
・Standard size: A532.48
・Recommended size: A530.48

[Product Category]
magnesium wheel
For Street (High Performance, Street Wheels)
For Racing (Competition wheels)

[Material]
Magnesium (Mg) for forging ZK60A

[Design]
7-spoke
Fluid spoke design for improved traction characteristics

[Safety Standards]
[STREET WHEEL]
JWL standard compliant product

[manufacturing process]
Forging method (Forged)
Hot forging
Exclusive Mold
Multi-directional simultaneous press forging (Total Formed Forging System)
15000t class forging press
Final shape cutting and finishing by CNC (computer controlled)

[Corrosion protection treatment]
Formation of surface protective film against corrosion by anodic oxidation treatment

[Country of origin]
Italy (MADE IN ITALY)

[Manufacturers]
Brembo S.p.A.
Via Brembo, 25 24035 CURNO (BG) Italy

**The design of the rim is slightly different for street / racing due to the adaptation to the purpose of use.
*The M7R Genesi comes standard with an L (90°) specification air valve.
*Special sprockets are sold separately.
*Price includes front and rear wheels and accessories.

[Display of wheel weight (measurement conditions)]
*The wheel weight displayed is the "wheel assembly weight" which includes the weight of fitting parts such as bearings, side collars and sprocket holders.
*Weights are measured on the assumption that the same components are used for both the stock wheel and the Marchesini wheel - the weight of the wheel alone, without the components, does not allow a proper comparison due to the differences in construction.
*In order to accurately compare the weight of the wheel with that of the stock-installed wheel, the weight measurement is standardized to the following conditions.
[FRONT WHEEL] = Wheel is removed from the bike and the weight is measured with tires and disc rotors removed
[REAR WHEEL] = Wheel is removed from the bike and the weight is measured with tires, disc rotors and sprockets removed
*"OEM ratio" is the ratio of weight reduction possible when comparing the weight of a Marchesini wheel to the weight of a stock (OEM) wheel under the same measurement conditions.(The larger the minus value, the lighter the wheel is compared to the stock wheel.)

[About the sprockets]
*For street use, unless there is a significant change in the tire size to be combined with the wheel change, the "stock standard size sprocket" should be selected as a general rule.Even if the rear tire size is changed by changing the wheel, the next change is considered as if there is no change in the tire diameter.
170/60ZR17 ⇔ 180/55ZR17 ⇔ 190/50ZR17
*The recommended sprocket size is different from the stock standard size in some models, but these models have a relatively large change in tire diameter by changing wheels and tires.The method for selecting the recommended size uses sample data calculated based on the ratio between the diameter of the tire that was installed before replacement and the diameter of the tire to be newly installed.

*Other colors and products may be included in the images.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..