Looks like you access from European region.
Would you shop at webike.eu.com?
18.34 USD (2,924 JPY)
Webike Point: +29 pt
(0.18 USD)
Delivery Information
This product is produced on order.
Usually takes around 8-10 days to ship.
FITMENT
HONDA
Open Fit Model Information Table
-
DIO
[AF18]*Cars with paper gaskets between crankcases must use paper gaskets when assembling.
-
SUPER DIO
[AF27]-SK50MM
-
G DASH
[AF23]
-
DIOSR
[AF25]
See all
HONDA
Product detail
For AF18E narrow shaft crankshaft engines
[Specifications]
■Oil seal x 1 (drive side)
■Oil seal x 1 (flywheel side)
**No data is available for use with other models.
*This product is not reusable because the dimensions have been adjusted.
*This is a part for those with a large amount of experience using Honda 50cc 2-stroke vertical engines.
*Compatibility with AF05E, AF12, and AF24E has not been confirmed.
*Some bikes use paper gaskets on the crankcase, while others use liquid gaskets.
*If a liquid gasket is used on the crankcase of a bike that needs a paper gasket, the crankcase will not be fully tightened due to the different width of the crankshaft, which will also damage the crankshaft.Do not conduct that.
*Be sure to check which type of gasket is used and assemble with the same specifications.
*When the shaft is made thicker, many related parts need to be changed.
*There may be changes in product specifications due to the manufacturer's reasons.
.
■Honda vertical 50cc two-stroke engine scooters have either narrow-shaft or thick-shaft crankshafts.
■The shaft of a narrow-shafted crankshaft often breaks from the base, so a thick-shafted crankshaft engine is recommended when making modifications.
■The narrow-shaft and thick-shaft crankshafts cannot be used in combination because they have their own crankcases and oil seals, but a thick-shaft crankshaft can be combined with a narrow-shaft crankcase by using this product.
■If the engine has thick-shaft crankshafts, it can be used with either Dio, Dio SR, Dio XR (thin belt) or ZX (thick belt).
■For those who have given up on overhauling the engine because they could not get their hands on a narrow-shaft crankshaft, or for those who want to convert a narrow-shaft engine to a ZX engine, this is recommended!
[If not converting to ZX (thick belt)] *Stock or aftermarket parts are both acceptable
◎Crankshaft (Thick Shaft) [Stock Part Number: 13000-GAH-720/721]
◎Lamp Plate
◎Pulley Boss
◎Drive Face
◎Face Mounting Washer [Stock Part Number: 90426-KBN-900]
◎Face Mounting Nut [Stock Part Number: 94001-12200-0S]
◎Kick Gear [Stock Part Number: 28230-GAH-720/28230-GBL-870]
◎Kick Gear Clip [Stock Part Number: 28223-GAH-720]
◎Crankcase Cover (kick side for large shaft)
[When converting to ZX (thick belt)] *Stock or aftermarket parts are both acceptable
◎Crankshaft (for ZX)
◎Lamp Plate
◎Pulley Boss for ZX
◎Drive Face
◎Face Mounting Washer [Stock Part Number: 90426-KBN-900]
◎Face Mounting Nut [Stock Part Number: 94001-12200-0S]
◎Kick Gear [Stock Part Number: 28230-GAH-720/28230-GBL-870]
◎Kick Gear Clip [Stock Part Number: 28223-GAH-720]
◎Crankcase Cover (kick side for large shaft)
◎Belt
◎Rear Driven Complete Set
◎Final Gear
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
