Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
26.27 USD (4,188 JPY)
Webike Point: +42 pt
(0.26 USD)
Delivery Information
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
Product detail
A "parking brake" that can be attached to the front brake master cylinder to lock the brake lever
■Convenient item to secure the brake lever in the braking position!!!
■By squeezing the brake lever again, the stopper can be easily released
■Also useful for securing a motorcycle when it is loaded onto another vehicle.
■Prevents the bike from moving when parked on rough or uneven terrain
■Machined aluminum with anodized finish for dress-up effect
■Simply remove the stock lever pivot bolt and install this product!!
■Two different lengths of collars, bolts, etc. are included for universal use
Supported models
Universal
For front brake master cylinder
(Brake lever pivot length
:
SP Takegawa Front Brake Master Cylinder
(06-08-1169) Compatible
Models confirmed compatible by SP Takegawa
ADV160(KF54)
ADV150(KF38)
PCX HYBRID(JF84)
PCX(JF28)(JF56)(JF81)(JK05)
PCX150(KF12)(KF18)(KF30)
PCX160(KF47)
GROM(JC61)(JC75)(JC92)
Dax125 (JB04) (JB06)
MSX/MSX125SF/MSX GROM(MLHJC92)
Monkey 125 (JB02) (JB03) (JB05) including Thailand models
DREAM50(AC15)
Magna 50 (AC13)
Rebel 250 (MC49)
CL250(MC57)
CL500(PC68)
CT125(JA55)(JA65)
Super Cub C125 (JA48) (JA58) (JA71)
Super Cub 110 (JA59)
Super Cub 110PRO (JA61)
Cross Cub 110 (JA60)
GB350/GB350S(NC59)
GB350C(NC64)
KSR110(KL110A-000001-)
KSR110PRO(KL110EEF)(JKAKL110EEDA88121-)
Z125PRO(BR125H)
D-TRACKER125(LX125D-A00001-)
PG-1 ('23 model)
XTZ125(LYOJ)
GN125-2F
*■Precautions
This product is an auxiliary part for parking.It does not absolutely secure the bike when parking on rough roads or slopes.
Always be sure to use the parking brake after checking that the engine has been stopped.
This product is for specific type of brake master cylinders.Check the specified dimensions of the brake lever mounting area indicated in the diagram.
It can be installed on various bikes as long as it is within the specified dimensions.
Additionally, there are instances where this product may not be installable on bikes with a cowl around the handlebar area, as the parking brake unit may interfere with the cowl.Please check the vehicle before purchasing.
The stock nut is to be reused.If the stock nut is damaged, please purchase a new one.
This product cannot be installed at the same time as SP Takegawa's billet aluminum levers.
*There may be changes in product specifications due to the manufacturer's reasons..
■Details
By attaching this product to the front brake master cylinder, the lever can be fixed in the braking state.This allows the parking position to be fixed so that the bike does not move back and forth when parked.
This product may also be used to prevent slippage when the motorcycle is being secured by tie-downs in a transporter.
This parking brake is a quick-release type where the stopper automatically returns by squeezing the brake lever again.
The main body is elaborately machined from aluminum and anodized on the surface.The texture of machined aluminum beautifully accentuates the handle area.
Laser marked with SP Takegawa logo.
■ Installation method
To install, remove the stock lever pivot bolt and nut that secure the front brake master cylinder and brake lever, stack the included washer and parking brake on top of the front brake master cylinder, and use the included socket cap bolt and stock nut to secure them together with the brake lever.
This product is supplied with two different dimensioned non-turn pins, collars, and bolts to enhance the universality of the targeted front brake master cylinders.
■ Short Collar / Bolt
:
■ Long Collar / Bolt
:
■ How to check the compatible dimensions of this product from the removed lever pivot bolt (including stock parts)
Measure the shaft length (from the underside of the bolt head to the start of the threaded section) and the shaft diameter (see diagram) of the lever pivot bolt removed when detaching the brake lever from the front brake master cylinder.
If the shaft length is 17mm or 22.5mm and the diameter of the shaft is Φ7.9mm, this product can be installed.
The shaft length is from the underside of the bolt head to the threaded part.
Not the outside dimensions (top to bottom).
Please check the diagram and confirm the dimensions.
■ About SP Takegawa installation confirmed bikes
SP Takegawa confirmed models are stock models that have been confirmed to be compatible by SP Takegawa mechanics.
Also, it has been confirmed that it can be installed together with SP Takegawa's knuckle guards (limited to the certain vehicles).
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
Full Custom Build Inspiration
