Looks like you access from European region.
Would you shop at webike.eu.com?
42.91 USD (6,840 JPY)
Delivery Information
If manufacturer have in stock, ships around 2nd Jul. 2026
Product detail
6H:6 holes
**This product is an external product.The appearance, engraving, etc. may differ from the stock item.
*After replacement, fuel adjustment (ECU correction/performance chip, etc.) may be required depending on specifications.
*We recommend that the installation be done by a person who has experience in maintenance, or by a maintenance store.
*Even if "all models" are indicated, the amount of setting will vary depending on the year, specifications, ECU, and modifications.
*Please check the shape of the injectors and couplers on the current vehicle.
*There may be changes in product specifications due to the manufacturer's reasons.
.
This is a *large capacity injector (external product)* for Honda small displacement FI vehicles.
This will help to secure sufficient fuel supply for the specification that is prone to fuel shortage due to intake/exhaust modification, big bore, high camshaft, etc.
The 6-hole type is expected to provide stable atomization and is recommended for "foundation building" to adjust to the desired air-fuel ratio.
Features
Large capacity 125cc (approximate dispensing volume)Increased fuel supply limits
6-hole (6H)Designed for easy and stable atomization (*Atomization characteristics depend on product specifications)
High quality and low price outside the company:.For cosmetic customization/repair
Many compatible modelsWide range of Cub and Mini series
Specification
・6H:6 holes (6 holes) 125cc: 125ccGenerally, it is expressed in terms of discharge flow rate (cc/min), and is often used to mean "approximately 125 cc per minute at 100% duty (open) at the specified fuel pressure".
Approximate valueApprox. 2.08cc/sec (=125÷60)
*Discharge rate varies with fuel pressure (kPa/bar).
*If fuel pressure conditions are not stated, the values should be considered as a rough guide.
Recommended for
To compensate for vehicles that tend to run low on fuel due to intake and exhaust replacement
Big bore to give more room for fuel supply.
I want to raise the upper limit of the setting to match the target air/fuel ratio.
To reduce cost compared to stock replacement (external parts)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.