[SIP SERIES PORDOI] Wheel rim SIP SERIES PORDOI 3.0x13 ET20 5x86

SIP Series PORDOI wheels with fully legal road certification，for Vespa GTS models.
The SIP SERIES PORDOI rims had their debut appearance with our custom GTS 2019 that shares the same name.
The good resonance and positive feedback generated motivated us to make these uniquely-styled wheels，with their special features，available to buy in our webshop.
Available in either 12" or 13" diameter.
Up to 140/70-12" tyres with the 12" wheels.
Up to 140/60-13" tyres with the 13" wheels.
German MOT approval certification.
Various colours available.
We consciously designed these rims to emphasise the width to the maximum，making them noticeably broader-looking and more massively-constructed than any other aftermarket wheels that are available for the Vespa GTS models.
The ten spokes，with partly machined surfacing，rounds up the unique custom look.
13"
The first 13" wheel in existence with full German MOT certification that can be mounted on to the Vespa GTS with no problems.
No more legal grey-areas or hassle with the police and vehicle testers! Bolt them on to your Vespa and enjoy full legality with your impressive 13" upgrade conversion!
But，we did not just leave it at that，we also took care of having 140 sized tyres fully homologated for use in combination with this wheel.
The consequences? Quite simply，instead of just the 130 tyres，the 140/60-13" tyres are now fully road legal when mounted to these wheels! It has never before been easier for a 13" wheel conversion，in combination with wider tyres，to receive official recognition and approval.
The following tyre-sizes are approved for our PORDOI rim:
Tyre size front axle:110/70-13 in connection with
Tyre size rear axle:110/70-13 opt.
120/70-13 opt.
130/60-13 opt.
130/70-13 opt.
140/60-13
Tyre size front axle:120/70-13 in connection with
Tyre size rear axle:120/70-13 opt.
130/60-13 opt.
130/70-13 opt.
140/60-13
Tyre size front axle:130/60-13 in connection with
Tyre size rear axle:130/60-13 opt.
130/70-13 opt.
140/60-13
Tyre size front axle:130/70-13 in connection with
Tyre size rear axle:130/70-13 opt.
140/60-13
Tyre size front axle:140/60-13 in connection with
Tyre size rear axle:140/60-13
When using the 140/60-13" tyre on this special wheel，a tyre approval from the tire manufacturer must be submitted.
You can find the ABE (approval) document in the download area where all approved tyres including the separate tyre-approval are listed.
Information:Once the size of the tyre has been altered the conversion ratio of the mechanical ORIGINAL speedometer is also affected.
As the original speedometer has around a 10% optimistic difference to the actual road speed - the tolerances，when using a 12" wheel with a 140 tyre or even a 13" wheel with a 140 tyre，remain acceptable.
In the end this conversion has the effect of making the displayed speed more accurate!
Both the 12" and 13" wheels are fully approved and certified for legal road use by the German MOT.
The latest certification is available for our customers in the download section of our webshop.
Please check for the validity of this documentation in your country in combination with your scooter before ordering!
Mounting information:
Front wheel:Plug & Play! No additional mounting accessories are required!
Rear wheel:To mount these wheels to the rear of your GTS，this special shaft sleeve (# MV848039) is always required.
If your scooter is also equipped with an ABS system，a mounting kit (# MV000617K or # MV000617) along with new wheel bolts and mounting screws for the ton wheel are also required.
These are not included in the delivery and must be ordered separately.
Following mounting of the wheel to an ABS equipped model，the ASR/ABS system requires recalibration.
A detailed set of instructions are also included in the download section of the webshop，or in the scooters owners handbook.
Depending on the size of the tire，it may rub against the inside of the rear fender.
This must be moved up slightly by loosening the screws.
Depending on the size of the tire，it may rub against the inside of the rear fender.
This must be moved up slightly by loosening the screws.
These wheels are manufactured in accord with the European Tyre and Rim Technical Organisation (ETRTO) guidelines.
Conclusion:These rims are true eye-candy，opening up new possibilities，with full legal certification for road use.
Do not forget to order the correct valve dust-covers for these wheels.
We recommend the SIP Series PORDOI (# MV872300)
Suitable valves (# PI597679/59767900) will also be required for the front and rear.
In order to mount the rear wheel correctly the short ORIGINAL shaft sleeve must be replaced with our version (# MV848039).
Models with ABS require a suitable mounting kit for the ton wheel (such as the MV000617K or the MV000617).
New tyres are essential.
We recommend the MICHELIN Power Pure SC 2CT，front 120/70-13" and rear 140/60-13 for 13" wheels
Optimise your suspension with a set of our SIP Performance shock absorbers!
＞ Alongside their modern design, the wide rim-well is also a definite eye-catcher! Once a fat 140 tyre has been fitted to the rear, the appearance of the GTS becomes mightier than ever before ＜
-World of Bike，04/2021