Neoprene Fork Boots

[How is it used?
I was riding with Headlight Mask + BellowsBoots on my RM250 with upright suspension, but I often get mistaken for an RMX and BellowsBoots looked tacky, so I replaced them with this product.
I had worn them when I was riding my RM125 a long time ago, and I knew that they were very durable for the price, which was also a Point of my choice.

Was the one you received as per Image?
As per Image

Was the installation difficult?
It is not a magic tape fastening type, so you need to pull out the fork once and put it back on.

How was your experience with it?
Parenthesis is great.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have not yet taken it to a course where I would do Inner Tube like White well, so I don't know how well it protects it, but it is quite thick, so I think it will protect it.

When I changed the fork oil, the OEM boots deteriorated and I couldn't get rid of the dirt, so I put them on.
If you can remove the front fork by yourself, you can easily attach it by tying it with Tie Wrap.
If the bindings are not tight enough, they will shift.
Even if mud gets on it, it can be removed with water, so it is easier to clean than the bellows Boots.

The Fork of the TT 250 R RAID was degraded and replaced.
Installation was also easy with the included Tie Wrap. Appearance improved Parenthesis.
I heard that deterioration is earlier than Bellows, but because it is cheaper than Bellows, it is good.

I did not like Bellows of erect Fork, I made it here.
For installation it is necessary to remove Fork,
It is not so much Large strange work so you do not have to worry Large will be durable.
Let's match the amount of protrusion properly.

I use this type since I was on SEROW.
(SEROW is a narrow one of certain famous Off-roadShop)
It is advantageous that the appearance is clear and the tear is inconspicuous.
Perhaps it will rain, I think water will accumulate on Dust Seal.
According to a certain Shop it seems that protection type of this type is higher,
It will be cool as long as it does not penetrate even the bushes full of thorns.

I feel that seams are weak. DT 230 LANZA's Fork
It's not that thick, but where I covered the Outer
I got a little frayed.
Tie Wrap is not used because it is quite hard.

To protect the damage of the Inner Tube of Front fork from the stepping stones etc and to protect the Fork seal taking on the mud etc, no longer classic Items for Off-road motorcycle.

Installing - The replacement itself is easy to install just by pulling out Front fork, covering it from the top, fixing the upper end and lower end with Tie Wrap, but still it was a little troublesome to have to remove Fork from Stem.

This time I used it with CRF 125 F. Length was not a problem, but the thickness of Fork might not have been enough to use with CRF 125 F.
But, compared with the appearance of Bellows' Fork Boots, it became quite SMART, so ◎.