M6 Aluminum Spacer Ф18

Japanese Webike user

Excellent

Jun 11, 2020

Aluminum spacer

There are several patterns, colors and shapes to choose from
Other Brand ProductScreen's off-color plastic washer Exchange from
The head of the torque is changed to a thin type, and washer is used here The custom feel goes up
Since it also expands the contact area, it may be effective in preventing cracking

Helpful?

Very Good

Oct 1, 2016

The quality is good

It is polite making without cutting marks. Just a small hole is not easy to clean because dirt collects with Off cars, so I'd like a different design. After that DRC made Red alumite is fearing that it fades as fast as Zeta, so it's worried.

Like Brake hose I am doing Accent with Red and Blue. Because I made Sprocket Large in RMX, changing the position of Guide changed the position of Bolt in Swingarm, so it was hidden.

It's good for a little Accent as it's not expensive.

Just with a shoulder stick and nothing or an Iloilo type so as not to make a mistake.

Helpful?

Excellent

Dec 9, 2013

DRC Φ18M6 Aluminum Spacer: Part No. D58-57-251

I fastened my boots with this DRC Φ18M6 Aluminum Spacer Type 2 (Including Collar).

You have to chose from Type 1 or Type 2 depending on where you plan to install it.

I used this DRC Φ18M6 Aluminum Spacer for decoration.

I attached red anodized spacers to bolt necks to add color and decorate the vehicle.

It'll add style and you also let you feel pleasure of customizing.

This DRC Φ18M6 Aluminum Spacer is not so expensive. It's rather cheap and can be easily installed. It is highly recommended.

By means of decorating your vehicle.

By installing a spacer and screwing it on with an aluminum screw, you'll be able to reduce weight, but on the other hand, it may cause vulnerability at a high percentage.
So, when you're using them on sections that require reinforcement, I wouldn't use aluminum. And suggest you don't as well.

These parts are only for decoration and do not offer utility or performance.
However, it is great to see the vehicle change its appearance. And I'd like you to feel the same way.
I recommend the DRC Φ18M6 Aluminum Spacer because they are decorative and cheap.

Starting from step by step, with low cost items. This is my moto for custom.

Helpful?

Very Good

Feb 20, 2013

Since it is cheap, it can be dressed up freely.
If careful also about such fine places, whenever it sees, it can murmur It is Parenthesis-good and beautiful (since it is decolored, it thinks in a smile
, however the place where direct sunlight hits easily at the time of parking, and may be a thing.).Although attached to the circumference of a right-hand side Radiator, it has been decolored immediately.(However being unable to win smartness again a new article wearing)
Left-hand side is not simply being decolored at all.since -- a color will be kept long if a place is taken into consideration.
Let's investigate whether the outside diameter of a Spacer and thickness fit it and the part of the Motorcycle which it is going to attach.

Helpful?

Very Good

Aug 18, 2010

It exchanged for the anchor bolt of the step portion of a JOG next zone.
It attached simultaneously with the aluminum taper bolt which has come out of DRC.
The fine place was also changed although it was a portion which is not seen usually.
There are also four kinds of colors and it can make oneself liking in the combination of a color with a spacer.
Since it is not expensive, it is recommended.
Although it cannot use for the place which needs reinforcement, I think that it is enough for covers.