Looks like you access from European region.
Would you shop at webike.eu.com?
24.8 USD (3,954 JPY)
Delivery Information
Please select product form first.
Manufacturer Part Number
F5871(D45-29-347)
F5872(D45-29-348)
*
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Edge taillight with high visibility by using 16 LED lamps of high brightness, long life and power saving for red light.
The LED with fast response speed is suitable for the stop lamp, and the stop lamp lights up instantly.
In addition, 3 LEDs are installed in the license plate lights.
The sharp taillight lens tightens the rear fender area and asserts itself on the street.
The "MOTO LED" is a model that realizes the ideal required for off-road vehicle lights.
Making the best use of the characteristics of LED, DRC pursued durability, reduction of power consumption, and compactness under any environment, and completed a product with very high fighting power
Adoption of ultra-brightness LED
Outstanding visibility with over 10,000 millicandela LEDs!
Reaction speed UP
The response time is 0.2 seconds faster than stock bulbs, instantly transmitting the rider's intentions to the lamp for greater safety.
High durability
It is resistant to earthquakes and shocks, hard to break, and can be used for about 100,000 hours with constant lighting.
The LED unit generates almost no heat, and there is no need to worry about running out of bulbs because there is no glass breakage when it gets wet.
No need to change the light bulb and can be used semi-permanently.
conservation of electric power
It consumes about 1/40th of a stock bulb and clears the problem of dimming of the headlight at the time of braking that tends to occur in vehicles with little power generation and battery-less vehicles.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
![[Webike Monitor] It attached to <br><br>VTR250 (MC33).
Although he planned to have considered only exchange as <br>pure light, the Size of the Screw did not suit and it was not able to do (an Edge tail light is M5 standard practice).
<br> Since it seemed t](https://st-img.webike-cdn.net/st/photo/article/41/1331623149041M.jpg)
Fits:Others Universal Universal Universal
Jun 24, 2021
It's a beautiful looking Refreshing!
I installed it in combination with the Fender Eliminator Kit for the D Tracker250, but I was able to install it beautifully without machining the mounting holes.
RefreshingSporty because it is Smaller than OEM!
Even though it is small, the brightness is excellent, so you can see clearly even from a distance.
Fits:Others Universal Universal Universal
Jul 26, 2020
The LED Tail Lamp of the same DRC was attached to the body which was purchased used, but because the Left half and Number etc. were unlit, the same one was purchased again.
As others say, it seems to be difficult to waterproof, and the inside was in a state of rust, so this time I installed it after coking it.
It's been about a month since I used it, but so far it's been a large and durable. (I haven't run in the rain.)
The design is good, so now I'm concerned about the durability.
It's a bit expensive, but I'd buy it again next time if I had to buy the cheap Manufacturer Unknown.
Fits:Others Universal Universal Universal
Mar 13, 2019
License Plate Light stops working after a year
I installed it in MD30, but after 1 year (about 6,000km driving) License Plate Light does not turn on And it seems to have many of the same problems with other people's Impressions (TailLED is fine) I think there is a fundamental problem, don't you?
Design is vastly superior to the others, so Smoke Type is also available on the increased MD30 I installed the This one is safe, as it has hardly been driven yet
[Color] Isn't Smoke hard to see? But it is bright enough to be always on, and when the Stop-lamp light is on ( (Are they changing the voltage?) It seems to be a problem because I can see the difference between the two
Rather, I think it's too bright with normal Red
If the License Plate Light doesn't turn on, I'm going to try to Rose to see if it can be repaired But I'm sorry to say that the replacement is not kind to your Wallet
Fits:Others Universal Universal Universal
Installed on: HONDA CBR600RR
Jul 17, 2018
使用车型时是HONDA CBR600RR 2010我用作替换原厂牌照灯，原装的牌照灯坏了，打算换一个新的牌照灯我觉得DRC这款尾灯外形比原装要更好看，但是电路方面需要注意面要找家专业维修改装店处理相信LED灯泡会卤素灯泡使用寿命会更长When using the model, it is HONDA CBR600RR 2010I used to replace the original license plate light, the original license plate light is broken, I plan to change a new license plate light.I think DRC's taillights look better than the original, but the circuit needs to pay attention to find a professional repair shop to deal withBelieve that LED bulbs will have a longer life of halogen bulbs(translated by Google Translator)
View DetailFits:Others Universal Universal Universal
Oct 21, 2015
KSR110 (A6) It installed in.
It was DRC of the same shape before but it was Smoke version.
The LED for License Plate Light went off and changed to Red for Smoke because it is not even old.
The LED is out of vibration from a single cylinder.
The goodness of shape and the Fitting of a Manufacturer's Fender kick are good
Review detail
