Looks like you access from European region.
Would you shop at webike.eu.com?
12.73 USD (2,029 JPY)
Delivery Information
In Stock : 5 left, Ships within 24 hours.
Estimated arrival date around
Manufacturer's Part Number: ZE37-0321
Quantity: 4 pieces
Material: Aluminum
**Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The rubber mount top clamp is replaced with a high-rigidity aluminum part to prevent the handlebar clamp from twisting when the bike falls.
The handlebar clamps are more rigid and the handling is more direct.
4pcs/pack
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
![[Vehicle type] Since the pure rubber mount was distorted and sense of incongruity was felt for the handle when a DR-Z400SM [buying motive] fall was carried out, while considering the exchange to an external article, it got to know that the lineup was carri](https://st-img.webike-cdn.net/st/photo/article/00/1268656317200M.jpg)
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI D-Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX125 KLX125 10-16, KAWASAKI KLX140RL 26
Installed on: SUZUKI RM-Z250
Sep 11, 2022
Solid replacement to OEM. These provide visible cushioning that is felt while riding. The material is also not chewable. It is very sturdy and stylish. Looks beautiful. The shipping of webike arrived in 10 days, incredibly fast. Beautifully packaged.
View Detail
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI D-Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX125 KLX125 10-16, KAWASAKI KLX140RL 26
May 10, 2022
Used to rigidize the handlebar holder of Z900RS CAFE.
The visible cracks on the handlebar holderBush became noticeable, so I decided to replace the bush, but since the Z900RS bush and the old KX250F bush are common parts, I decided to use these parts to make the bush rigid, which I have been interested in for a long time.
After the exchange, the handling is Large-Shaped Solid, and the motorcycle information is conveyed in the same way as a handlebar such as SS without Bush intervention.
On the other hand, the amplitude of the vibration is transmitted digitally to the palm of the hand, unlike Normal, which is felt as an analog waveform, so care should be taken when using Touring Main.
However, the handlebar is raised by 4mm, which makes positioning a little easier in the case of CAFE, and since it is a 2,500 yen part, it can be tried on a no-go basis, including in the event of a problem with a car that is not compatible.
However, it is not visible while driving, and when I looked at Motorcycle again after the test run, it was not as flashy as I thought it would be, and it gives the impression that some customization has been done to the handlebar. It's okay. However, if there is a ZETA Titanium color, it would be better, so I gave it a score of 4.
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI D-Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX125 KLX125 10-16, KAWASAKI KLX140RL 26
Jun 3, 2019
This time, I replaced it to match the Front fork overhaul
In order to replace it, the front fork is in the way of removing the RPin and loosening the bolt If you don't remove the Front fork, it will be impossible to replace it
I also had to bend the OEM Bracket on the underside slightly to get the replacement work out
It could be as Accent
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI D-Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX125 KLX125 10-16, KAWASAKI KLX140RL 26
May 2, 2016
The OEM is Rubber, but if it runs it will bend the Handlebar Post. Although it seems that it will be hard to bend if this product is attached, its performance is unknown because it has not been dyed yet.
It may be fashion that Red looks glaring.
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI D-Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX125 KLX125 10-16, KAWASAKI KLX140RL 26
Mar 10, 2016
OEM is RubberMount, Handlebar is Gap Le and rigidity feeling is not good each time it falls, so I purchased it as a countermeasure. I think that it is easy to install and securely install it.
It is still unknown what it is compared with OEM because it is not running yet.
If you leave the OEM Washer, you can not insert split Pin. I think that you can insert it by removing either the top or the bottom, but I will keep it as 4 ☆ because it is anxious.
Review detail
