Looks like you access from European region.
Would you shop at webike.eu.com?
21.98 USD (3,504 JPY)
Delivery Information
Temporarily out of stock.
Arrival date at our warehouse: around 3 months.
MONKEY
AB27-1000001-
MONKEY
Z50J-2000001-
GORILLA
Z50J-2000001-
GORILLA
AB27-1000001-
○Discharge amount about 2 times (compared with 6V vehicle)
○Concave Drive Shaft
**After installing the oil pump kit, be sure to check the oil pressure rise.
*Major modification of the orifice is required for installation.(Super oil pump Φ1.5, Ultra oil pump Φ2.0)
*Installation requires a separate crankcase gasket (part number: 966-1015004) and a clutch outer cover gasket suitable for use with each vehicle are required.
*There may be changes in product specifications due to the manufacturer's reasons..
The oil discharge amount is more than twice as much with the super oil pump and more than three times as much with the ultra oil pump only by replacing the stock oil pump (1.8 times as much as the stock oil pump for 6V vehicles and 12V vehicles).This prevents the decrease of cooling function by the engine tuning such as big bore, and the decrease of oil pressure by the installation of the oil cooler, etc., and brings out the tuned engine performance to the maximum.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA Benly 50S Benly 50S CD50-1500001-, HONDA Benly CD50 Benly CD50 CD50-1500001-, HONDA CL50 CL50 BENLY CD50-1500001-, HONDA CRF50F CRF50F AE03 All models, HONDA CRF70F CRF70F DE02 All models
Oct 26, 2015
Gasket is included as well, just replace it.
I also thought about wearing at the same time as Bore up, but I thought I was going to wear it with another Timing.
I tried turning by hand, but I go to Smooth.
Precision looks good as well.
I expect that it will be effective when installed.
Fits:HONDA Benly 50S Benly 50S CD50-1500001-, HONDA Benly CD50 Benly CD50 CD50-1500001-, HONDA CL50 CL50 BENLY CD50-1500001-, HONDA CRF50F CRF50F AE03 All models, HONDA CRF70F CRF70F DE02 All models
May 1, 2015
Bore up, Clutch We replaced the Oil pump after the exchange.
Replace itself by removing + Screw 3, replace Gasket, just align the cutouts of the shaft.
Orifice 1. PinDrill is useful for extending to 5 mm.
If you do not leave Stud bolt you will not get ordinary Drill.
Case is Aluminum, so I was able to scrape crisply with a thumbwheel.
Fits:HONDA Benly 50S Benly 50S CD50-1500001-, HONDA Benly CD50 Benly CD50 CD50-1500001-, HONDA CL50 CL50 BENLY CD50-1500001-, HONDA CRF50F CRF50F AE03 All models, HONDA CRF70F CRF70F DE02 All models
Mar 11, 2013
It exchanged from the NORMAL Pump simultaneously with formation of an 85-cc Bore up, and strengthening Clutch introduction.Since the futility of the three 2 times time-and-effort time and effort of work [ a direction ] or an Oil introduced simultaneously with them since it is necessary to remove the
Clutch or to remove a Cylinder for Orifice processing was excluded, I thought that it was good.Since
Orifice processing only expands a little existing hole, it attaches a Drill to a Pin vise and can expand it easily only by making it rotate by hand.Therefore, it is not necessary to remove a Stud bolt.It expanded to 1.4 mm this time.If generation of heat by a Bore up is considered as the
Manufacturer also recommends, I will think whether it is safer to carry out strengthening of an Oil pump.
Fits:HONDA Benly 50S Benly 50S CD50-1500001-, HONDA Benly CD50 Benly CD50 CD50-1500001-, HONDA CL50 CL50 BENLY CD50-1500001-, HONDA CRF50F CRF50F AE03 All models, HONDA CRF70F CRF70F DE02 All models
Sep 12, 2012
[Webike Monitor] In connection with the
88cc Bore up, that of Mr. KITACO was decided on in search of the strengthening Oil pump.for a light-oriented reason, as compared with
other company's, Orifice expansion is also small -- carrying out -- quantity -- just for a moment -- it is less -- it is -- as -- although -- to a Normal head, I think that it is a cinch now.
Review detail
