Looks like you access from European region.
Would you shop at webike.eu.com?
27.8 ~ USD (4,431 JPY)
Delivery Information
Please select product form first.
NSF100
[Number of genuine links] 100
CBR125R
13-14
CBR125R
04-12
CBX125
83
YZF-R125
12-13
RZ50
98-05
TZR50
-93
TZR50
93-97
TS125R
89-99
RG125 gamma
-91
RG125 gamma
92-99
Jebel 125
94-00
KLX125
10-16
D Tracker 125
10-14
KDX125/SR
A2 [Number of stock links] 132 [Degree of fit] ◎.
Eliminator 125
01-03
RS4 125
12
Mulhacen125
[Number of stock links] 130 [Degree of fit] ◎.
Sticker ○
Chain size 428
Number of links (L) 106
Joint Type Caulking
Chain Color Silver
Sticker ○
Chain size 428
Number of links (L) 106
Joint Type Caulking
Chain Color Silver
For street/race use
Chain size: 428
Color: Silver
Chain type: Sealed chain
Seal: U-ring
Joint type: Rivet joint
Included: Joint x 1 (for 90 links or more)
** Fitment selection notes: Specifications in the fitment table are subject to change without notice.
* If purchasing a used vehicle, the chain size or length may differ from the original factory specifications.
* Always verify the chain size, link count, and brand currently installed on your vehicle before selection.
* For safe chain operation: If damage, rust, or wear is observed on the chain or sprockets, or if there is poor flexibility, seal loss on sealed chains, or abnormal noise during operation, it may lead to chain breakage. If these signs are present or chain adjustment is near its limit, it is time for replacement; replace the chain and sprockets simultaneously.
* If battery fluid contacts the chain, it will cause breakage; replace the chain immediately. If anti-freezing agents contact the chain, wash them off thoroughly.
* The drive chain is a critical safety component of a motorcycle. To avoid serious accidents and ensure safe operation, read the motorcycle owner's manual and the chain instruction manual thoroughly. Consult a mechanic regarding chain installation and handling.
* Clip joints and rivet joints are included for link counts of 70 or more.
* Product specifications may change due to manufacturer circumstances..
* The image is only for reference. The image shown may differ from the actual product.
A simple yet performance-oriented reinforced chain made from high-tension steel with special heat treatment.
Inner and outer plates feature a glossy silver plating.
The chic aesthetic matches all models from naked bikes to cruisers.
The definitive choice for converting vintage bikes to sealed chains!
The lightest in its class (compared to chains for the same class) / Increased acceleration! Ultra-thin seal GP series / Inherits racing specifications.
Resistance during acceleration has been reduced to the absolute limit.
An all-purpose, chic look that fits everything! Uses RK's proprietary ultra-thin seals, making the width equivalent to non-sealed chains.
Fits older motorcycles where standard sealed chains could not be used. (Please refer to the model-specific fitment table for details.)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
![Since the Rear sprocket of D-TRACKER 125 was exchanged for the 47 same dishes as KLX125, here [ of the number of LINKs of <br>KLX125 ] was attached.
The <br <br>> Chain of sound which strikes a Guide roller decreased certainly.
It is hoped that the part](https://st-img.webike-cdn.net/st/photo/article/43/1363335928843M.jpg)
Fits:APRILIA RS4 125 RS4 125 2012 OEM link count: 136. Fitment: Excellent., DERBI Mulhacen125 Mulhacen125 OEM link count: 130. Fitment: Excellent., HONDA CB100 CB100 1976-1977 OEM link count: 102. Fitment: Excellent., HONDA CB100 CB100 1978-1986 OEM link count: 100. Fitment: Excellent., HONDA CB125 CB125 1975-1979 S. OEM link count: 102. Fitment: Excellent.
Feb 11, 2016
Less than 10000 km running expired.
I was running cheerfully on the second stroke almost every day so I could not withstand the power, but I can not dismiss it.
Since Gold seems to be thicker in the future, I will use it there in the future or I will use another company Manufacturer such as EK.
Fits:APRILIA RS4 125 RS4 125 2012 OEM link count: 136. Fitment: Excellent., DERBI Mulhacen125 Mulhacen125 OEM link count: 130. Fitment: Excellent., HONDA CB100 CB100 1976-1977 OEM link count: 102. Fitment: Excellent., HONDA CB100 CB100 1978-1986 OEM link count: 100. Fitment: Excellent., HONDA CB125 CB125 1975-1979 S. OEM link count: 102. Fitment: Excellent.
Sep 29, 2015
After all Silver is astringent.
Purchased according to Rear suspension Grease up of KLX 125.
http : / / imp. webike. net / commu / diary / 0122703 /
It is simultaneous with Drive, Driven Sprocket.
OEM's Non-sealed Chain is rusty, stretchy, noisy
The Grease expired in no time, Maintenance frequency was
There are many drawbacks to me.
So I thought I was going to exchange KLX early purchase.
Since it is Custom from a new car, the change is a bit of a thing
I think that goodness will be transmitted from time to time in the future.
Fits:APRILIA RS4 125 RS4 125 2012 OEM link count: 136. Fitment: Excellent., DERBI Mulhacen125 Mulhacen125 OEM link count: 130. Fitment: Excellent., HONDA CB100 CB100 1976-1977 OEM link count: 102. Fitment: Excellent., HONDA CB100 CB100 1978-1986 OEM link count: 100. Fitment: Excellent., HONDA CB125 CB125 1975-1979 S. OEM link count: 102. Fitment: Excellent.
Jul 21, 2015
Front and rear Sprocket and Chain are new. Actually I was going to be a non-seal guy but thinking about the future Seal chain. This Chain is Seal, but it is lighter than an ordinary Seal chain because it has only a width of Non-seal. It's 125cc after all so it's light and durable so I chose this.
Fits:APRILIA RS4 125 RS4 125 2012 OEM link count: 136. Fitment: Excellent., DERBI Mulhacen125 Mulhacen125 OEM link count: 130. Fitment: Excellent., HONDA CB100 CB100 1976-1977 OEM link count: 102. Fitment: Excellent., HONDA CB100 CB100 1978-1986 OEM link count: 100. Fitment: Excellent., HONDA CB125 CB125 1975-1979 S. OEM link count: 102. Fitment: Excellent.
Dec 20, 2014
I mounted it to a Apriria RS4 125.
Not like the OEM chain that stretched only after a 1,000km ride, this chain has much more quality.
Althouth the OEM chain is non-sealed, this one is, but it didn't have much friction as I thought it would.
The silver color seems to improve the appearance of the vehicle.
The joint included is a caulking type, but I purchased clip joints and used them instead because I didn't have caulking tools.
There's no problem to use clip joints if your vehicle is below 125cc.
Fits:APRILIA RS4 125 RS4 125 2012 OEM link count: 136. Fitment: Excellent., DERBI Mulhacen125 Mulhacen125 OEM link count: 130. Fitment: Excellent., HONDA CB100 CB100 1976-1977 OEM link count: 102. Fitment: Excellent., HONDA CB100 CB100 1978-1986 OEM link count: 100. Fitment: Excellent., HONDA CB125 CB125 1975-1979 S. OEM link count: 102. Fitment: Excellent.
Mar 18, 2013
Since the Rear sprocket of D-TRACKER 125 was exchanged for the 47 same dishes as KLX125, here [ of the number of LINKs of
KLX125 ] was attached.The
> Chain of sound which strikes a Guide roller decreased certainly.It is hoped that the part loss whose
interference decreased also decreases and it may carry out a fuel consumption Up.
Review detail
