Since this is specified as a Manual, it uses.
Although exchange will be carried out in about one year, it is likely to have more.
Looks like you access from European region.
Would you shop at webike.eu.com?
24.22 USD (3,861 JPY)
Webike Point: +193 pt
(1.21 USD)
Delivery Information
This item is discontinued.
FITMENT
SUZUKI
-
RM125
96- RF15A/RF16A 96.8- [displacement]125 [number of units required]1
KTM
Open Fit Model Information Table
-
125 Enduro
99 [Number of units required]1
Product detail
[Stock Number] 4492
[Shape] Integral type
[Size]
Screw diameter: Φ14.0mm
Screw length: 19.0mm
Hexagon dihedral width: Hex 20.8mm
[NGK part number] R6918B-8
[Type] Racing Plug
[Heat Value] 8
[Compatibility Information] SUZUKI Stock Part Number Compatibility: 09482-00509
**Even if you purchase in units of 10 pieces (1 box), it will not be delivered in 1 box.
*Terminals, tightening angle, etc. may differ depending on the model.Please refer to the link for the detailed fitting and installation instructions..
* The image is only for reference. The image shown may differ from the actual product.
Webike has all NGK plugs in stock! .
* The item may be temporarily out of stock due to manufacturer shortages, etc
Stable ignition performance and combustion efficiency at a reasonable price.It brings out the true performance of the engine.
[Features of Plug]
It is designed to withstand severe conditions such as high combustion temperature and explosion pressure, and its superiority has been recognized in domestic and international four-wheel and two-wheel races such as F-1, WRC and MotoGP.
This is a high heat value plug for high compression, high rotation, and high output engines.
・Used under severe conditions such as full throttle acceleration, continuous ultra-high RPM, and high speed operation
・In addition to easy sparking, good ignition performance, and good acceleration, it should be trouble-free.
・The plugs with the following electrode materials and shapes are used because they are used under severe conditions.
*The effect varies depending on the vehicle.
[About the shape of the plug terminal]
●Select a terminal shape that matches the engine and plug cord installation side.
There are three types of plug terminals: integrated type, separate type, screw type, and punch-and-caulk type.
Mainly, "integral type" and "punch caulking type" are used for four-wheeled vehicles and "screw type" for two-wheeled vehicles, and "separate type" is available for plugs used for both four-wheeled and two-wheeled vehicles.
In addition, the terminal part of the "separate type" can be removed, but the terminal part of the "integrated type" and "punch-and-caulk type" cannot be removed.If you try to remove it forcibly, the terminal part may be broken.
In case of using the "separate type" as the "screw type", remove the terminal nut.
When using the product with the terminal nut attached, make sure that it is not loose, and if it is loose, tighten it lightly with pliers or the like.
| [Features of NGK plug] |
| - This is a super "wide range" plug - |
| The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
 |
| Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
| ■ Heat value of the plug |
| - High alumina porcelain from New Ceramics is used as the insulator - |
| - Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
| - Strong and airtight in construction - |
| Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
| Special Nickel alloy electrodes are used for superior durability. |
 |
| - Corrugations in the insulator ensure good insulation and prevent flashover - |
| During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
| What is a flashover... |
| It is a spark between the terminal and the main unit fitting as shown in the image. |
 |
| ■ Flashover |
| ■The advantages of the plug |
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KTM 125 Enduro 125 Enduro 99 Quantity required: 1, SUZUKI RM125 RM125 96- RF15A/RF16A 96.8- Displacement: 125 Quantity required: 1
May 16, 2013
Helpful?
Fits:KTM 125 Enduro 125 Enduro 99 Quantity required: 1, SUZUKI RM125 RM125 96- RF15A/RF16A 96.8- Displacement: 125 Quantity required: 1
Jul 12, 2012
Since it has written Attach this to a Manual, this is used.It is only 1-time exchange for the
year.
Since it has written Attach this to a Manual, this is used.It is only 1-time exchange for the
year.
Helpful?
Full Custom Build Inspiration
