Sucker-Type Fuel Tank Bag

I had been using it for a long time because it was just the right size, but the suction cup was ruined and I had to replace it.

Suction Cup replacement for this Bag is not possible Type, but it would be easy to do, and I did it!

All you need is Cutter, Nipper or Radio pliers, etc. and a hundred Suction CupQuantity:2pc. SetInputQuantity:2 Sets.
https://jp.daisonet.com/collections/remodeling0206/products/4549131632637

Suction Cup can be easily cut by pulling it under tension.

? When cut, you will see a steel core, pull it out using pliers, etc.

? but this is also the case. Robust. It had to be this sturdy to keep it from coming off. The GRUGRU was pulled out by pinching it with the nipper and using the leverage of the wrist. The Cushion material is not necessary, so it was discarded.

Drilling holes. Drilling a hole. you can drill through with a cutter, but I melted the hole size because I had a solder iron.

Pass the Suction Cup through the Hook and fasten the Hook at the back. This hook is easy to break if you screw it on as it is, so you can easily insert and remove it by attaching a flange. If it breaks, use a ring or something to hold it in place.

Left is Before, Right is After

It's not terribly difficult, but you need a nipper that you can grab tightly, even if it's a hundred bucks!



Special note

This is its successor? This is the type that can replace the Suction Cup.
https://www.webike.net/sd/20110672/
Highly recommended as the price is the same.

It is the Large size of the Limit on the Tank, but I think it is good because if this size is not there, the heat insulation Bottle will not fit.

When I cut the Handlebar, it hits the Navigation System Case, so I plan to move the Navigation one separately.

I'll add a photo.

In fact, it is a little Large threshold in Tank of DUKE200, but because I wanted to put 500ml insulated Bottle, this Size is necessary.

The front side of the Tank of DUKE is not attached because it is uneven, and it is fastened with the Belt with Snap that I have. The Suction Cup on the back side is attached to the tank by a screw. I am considering the belt type handmade so that it may be easy to put on and off at the time of refueling.

The thick texture is very good and solid, which is more expensive than the cheap ones from China Site. Of course, the transparent vinyl part is not wavy and thick. [Color] Clear

The topmost section is for thin items. There is a divider that can be moved, a card holder, and a small coin purse.

It is not suitable because it runs out of heat even at the time of the fine weather of March when I leave a smart phone and Navigation in. First of all, it's too close to the front and you can't see it at all in sunlight. (Lol)

If there is an ETC, I don't need small change anymore, and it's just an Accessory Case.

The bottom section has a telescopic bellows that can be expanded to hold a Rain Cover and a 500ml insulated bottle when it's Small, or a Large if you want to take a few souvenirs.

It comes with a Rain Cover, but if I had fastened it loosely, it would have flown away with the wind pressure while driving! (Lol)

If you want to add a practical tank bag to your DUKE, this is the way to go.

Because it is a Suction Cup type, the mark of Suction Cup may be attached. However, it is not a problem because it is a stain of Level that can be removed.

It attached to 2005 model CBR1000RR.Since the
> size is very compact, you do not need to become the obstacle of operation by SS type Motorcycle, either.although the part and a load seldom enter, it is satisfactory if it is a Touring about a day's trip -- it is .It did not separate, even if it ran the high speed, since the
> sucker was also powerful.The Clear top which can check a Route by a Touring mapple is found useful very much after
for me who have not attached the Navigation.
Although it is however unavoidable, when it is oil supply, it is troublesome a little.About
> attachment, since my CBR had good Tank form, it was able to make the problem there be nothing.I think that it is the product which has improved with the
> Compact size.