Mounted on a 14 year old falcon. For domestic specification, the function is two. One is mode 1 of 180 km limiter release. The other is to adjust the front and rear sprocket teeth number change. For overseas specification, three functions. Mode 2 of 300 km limiter release, mode 1 of 3 rd power enhanced mode 3. And correspond to the number of sprocket teeth. Mounting is made by connecting to the gear position connector near the seat near the seat under the tank and connecting to the connector for the vehicle speed sensor near the center of the left side cowl,. Since both are coupler connections, it is not difficult if you know which connector, but there are similar connectors, so you need to be careful. For this connection, it is necessary to remove the inner side, the under side, the left side cowl. The other last one needs to connect to the green and black wire from the ECU under the seat, and you have to cut it with courage. Since there is also Giboshi for connection, if you process it so that it can be reconnected when detached, there is no problem. The main body was installed under the rear seat. The number of sprocket teeth is genuine, front 17, rear 40. When changing the number of sprocket teeth, you can change this setting. I chose this because the genuine display can be used as it is for the gear position indication etc.. It is a color copy, but since the manual is included, it is good to do while watching it. If the price is about half price, I think that I bought it without trouble. Satisfied as things.
View Detail
