SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
/
  • SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
  • SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
  • SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]
PROTEC

SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]

Product # 11055

5 (1 reviews)

・This option is not available.

・Please select other options.

94.66 USD (15,091 JPY)

Webike Point: +755 pt  (4.73 USD)

Delivery Information

  • This item is discontinued.

Quantity
Ask about this product

FITMENT

KAWASAKI

  • NINJA1000 (Z1000SX)

    -13 ZRT00G* Common to ABS models

  • NINJA1000 (Z1000SX)

    -13 ZXT00G* Common to ABS models

Open Fit Model Information Table

Product detail

[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)

[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.

**When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.

*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation..

●All the necessary parts are included in this kit!Easy installation with special harness!
It can be installed easily without soldering because it uses a special harness for each model.
*The vehicle-specific harness has a 12V (+) service terminal for easy installation of the CS-550 burglar alarm.

●Compact design!
The main unit dimensions are W25.5mm X H30.5mm X D15.5mm (excluding protruding parts), a compact design that does not interfere with installation around the meter.


●LED display for high visibility!
Equipped with a dimmer sensor [automatic dimming function].The brightness of the LED is automatically adjusted to be brighter in the daytime and darker at night to improve the visibility of the digital numerals.

●Equipped with a shift up indicator!
Since the rpm can be set arbitrarily, it can be used for everything from narrowing to preventing over-revving.The blue LED will light up when the rotation is higher than the set value.
*You can re-register as many times as you like.

Points of Attention

* If there may be an instruction manual included, it will be written in Japanese.

MODEL PAGE LINKS

KAWASAKI

Customer Reviews

5.0 /5
(1 reviews)

5 stars

100%

4 stars

0%

3 stars

0%

2 stars

0%

1 star

0%

Write a Review
review banner

Reviews with image

PROTEC

SPI-K63 Shift Position Indicator Exclusive Kit [for NINJA1000]

Fits:KAWASAKI Ninja 1000 (Z1000SX) Ninja 1000 (Z1000SX) Up to 2013 ZRT00G (Common for ABS models), KAWASAKI Ninja 1000 (Z1000SX) Ninja 1000 (Z1000SX) Up to 2013 ZXT00G (Common for ABS models)

Excellent

Nov 8, 2012

[Webike Monitor] Although it wavered with
GIpro, it carried out here at the point which a Security can add as an Option.The Response at the time of a Shift change also has a display better than GIpro which was being used for the Motorcycle in front o

[Webike Monitor] Although it wavered with
GIpro, it carried out here at the point which a Security can add as an Option.The Response at the time of a Shift change also has a display better than GIpro which was being used for the Motorcycle in front of
legible.There is extendibility which can add a good

O point
Security.It calls at
attachment position, and a backlight is also visible.Merit of a Response which reacts to the
Shift change immediately.
The Rev-indicator function which can be set up arbitrarily is attached.

O -- an attachment place is chosen from regrettable point
GIpro somewhat greatly.Since it is not
full water proof, it is somewhat anxious.since the adjustment button of the
Rev indicator is in the rear face of a main part -- each time -- double-stick tape -- to restick is required

View Detail
[Webike Monitor] Although it wavered with GIpro, i...
Helpful?

Full Custom Build Inspiration

See all
KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



Review detail

Scroll to Top
Scroll to Top