SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
/
  • SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
  • SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
  • SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
  • SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]
PROTEC

SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]

Product # 11043

4.5 (2 reviews)

・This option is not available.

・Please select other options.

94.66 USD (15,091 JPY)

Webike Point: +755 pt  (4.73 USD)

Delivery Information

  • This item is discontinued.

Quantity
Ask about this product

FITMENT

HONDA

  • CBR250R (2011-)

    11-13 MC41* fits the 11-13 model *for ABS models

Open Fit Model Information Table

Product detail

[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)

[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.

**When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.

*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation..

●All the necessary parts are included in this kit!Easy installation with special harness!
It can be installed easily without soldering because it uses a special harness for each model.
*The vehicle-specific harness has a 12V (+) service terminal for easy installation of the CS-550 burglar alarm.

●Compact design!
The main unit dimensions are W25.5mm X H30.5mm X D15.5mm (excluding protruding parts), a compact design that does not interfere with installation around the meter.


●LED display for high visibility!
Equipped with a dimmer sensor [automatic dimming function].The brightness of the LED is automatically adjusted to be brighter in the daytime and darker at night to improve the visibility of the digital numerals.

●Equipped with a shift up indicator!
Since the rpm can be set arbitrarily, it can be used for everything from narrowing to preventing over-revving.The blue LED will light up when the rotation is higher than the set value.
*You can re-register as many times as you like.

Points of Attention

* If there may be an instruction manual included, it will be written in Japanese.

MODEL PAGE LINKS

HONDA

Customer Reviews

4.5 /5
(2 reviews)

5 stars

50%

4 stars

50%

3 stars

0%

2 stars

0%

1 star

0%

Write a Review
review banner

Reviews with image

To maintain the RPMs when driving around town

PROTEC

SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]

Fits:HONDA CBR250R (2011-) CBR250R (2011-) 11-13 MC41. Fits 11-13 models. Compatible with ABS models.

Very Good

Oct 9, 2021

To maintain the RPMs when driving around town

I bought this for the purpose of knowing what speed and RPM I am at when I want to drive slowly in town. I bought it to know what speed I'm at and what rpm I'm at.

However, I mistakenly purchased the previous term and the latter term, and when I consulted PROTEC, I was able to exchange Harness free of charge, and I visited you also for installation.

If you are using OEM Handlebar or HURRICANE typeI, the position shown in the picture will not cause any problem, but if you are using type?

So it's better to install it a little bit to the left side so it won't interfere with Handlebar operation.

View Detail
To maintain the RPMs when driving around town
Helpful?

PROTEC

SPI-H01 Shift Position Indicator Exclusive Kit [for CBR250R (MC41)]

Fits:HONDA CBR250R (2011-) CBR250R (2011-) 11-13 MC41. Fits 11-13 models. Compatible with ABS models.

Excellent

Jun 20, 2012

[Webike Monitor]
> attachment was able to be performed easily, looking at the description enclosed.It was the design only for
vehicle type, and since it did not need to set up in particular, either, it was saved.
visibility is also good

[Webike Monitor]
> attachment was able to be performed easily, looking at the description enclosed.It was the design only for
vehicle type, and since it did not need to set up in particular, either, it was saved.
visibility is also good and I feel that the circumference of a Meter became a Race ish for a while.
They are satisfying goods.

View Detail
[Webike Monitor] > attachment was able to be perfo...
Helpful?

Full Custom Build Inspiration

See all
KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



Review detail

Scroll to Top
Scroll to Top