Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Fits:KAWASAKI ZRX1200 DAEG ZRX1200 DAEG 09-16

Things are good, but the Bolt that comes with it is not good.

Excellent

Oct 28, 2021

I bought this car to install Brembo caliper.
It has a nice texture and comes with a Shim for Centering out.
Some people don't like wearing Caliper support because it looks like Caliper is hanging down, but I like it a lot.
The supplied Bolt is an ordinary Stainless Steel Bolt with a strength rating of A2-70.
What is A2-70? If you're wondering, look it up. I'm sure it's not a problem because it's made by PartsManufacturer, but I don't think there are many OEM manufacturers that use A2-70 bolts to fix Caliper. So I changed the bolt to a stronger one, but be careful if you change the bolt.
Because it is not a common M10-1.25. Brembo caliper is M10-1.5.
It was Exactly 25mm in length. (bremboP4Casting)

Things are good, but the Bolt that comes with it i...

Helpful?

Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Fits:KAWASAKI ZRX1200 DAEG ZRX1200 DAEG 09-16

Black Anodized Specification is good because it looks tight.

Very Good

Mar 28, 2021

[How is it used?
In use for about 3 years after installation.

Was the one you received as per Image?
As per Image.

Was the installation difficult?
Easy to install, more difficult when trying to adjust the centering.

How was your experience with it?
I was concerned about fading over time because of the Black Anodized Specification, but I think it's excellent because there is no noticeable color fading so far.

[Included Parts:were they on?
Shim for adjustment is included.

[Was there anything that disappointed you?
None in particular

Other items that would be helpful
Point and hang of installation:The center position is shifted by the individual difference of Brake Caliper, Wheel and Caliper support. You may need to adjust the center position by using the shim provided with the caliper, or if the problem persists, you may need to ask PRO to adjust the center position by adding a shim to the wheel side.

Black Anodized Specification is good because it lo...

Helpful?

Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Fits:KAWASAKI ZRX1200 DAEG ZRX1200 DAEG 09-16

Japan User(translated)

Excellent

May 25, 2015

Caliper support

Exchange with Brembo caliper installation.
BlackLIMITED so Front fork is Black so Caliper support also selects Black. It became the commodity here inevitably. I think that it is good to have a sense of unity with the car body.

Helpful?

Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Fits:HONDA CB1100 CB1100 10-17, HONDA CB400SB CB400SB 05-20, HONDA CB400SF CB400SF 97-20, HONDA CB400SF Version S CB400SF Version S 96 (Not compatible with 97 and later), HONDA CBR600F4 CBR600F4 99-02

Quality is excellent, but there is a problem with the Position

Excellent

May 19, 2022

The quality is excellent and the Brembo caliper comes to the center perfectly without shim without error.
However, note that the Support is much lower than the Normal caliper, so the hose length will be about 5 cm shorter than the Normal. I use Daytona's extended hose.
It looks like AGRASSupport's position is not that different from Normal caliper for less Offset.

Quality is excellent, but there is a problem with ...

Helpful?

Caliper Support (GALE SPEED / Brembo 40mm & Standard Rotor Diameter)

Fits:YAMAHA FZ-6N FZ-6N 04, YAMAHA FZ6-S FAZER FZ6-S FAZER 04, YAMAHA FZR250R FZR250R 89-99, YAMAHA FZR400RR FZR400RR 90-94, YAMAHA FZR400RR SP FZR400RR SP 90-94

Average

Jan 11, 2022

RZ Caliper support

Front forkTZr on RZ250 (3ma) I purchased this product to equip a Brembo caliper to a vehicle of
The texture is good and fitting is no problem.
I think it looks good with the meat removed.