Looks like you access from European region.
Would you shop at webike.eu.com?
17.24 USD (2,749 JPY)
Delivery Information
This item is discontinued.
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
APE 50
08-12 (FI Drum brake models)*Processing of switch hole is required|*Clutch cable must be changed.
APE 50
-07|08 (Carburetor) *Only for APE100 (09-), it is necessary to drill the switch hole|*It is necessary to change the clutch cable.
APE 100
-12 (Drum brake models)*Processing of the switch hole is required for APE100 (09-) only|*It is necessary to change the installation of the clutch cable.
SR400
88-00 (CV Carb) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable, decompression cable and brake cable. |*Install with the bar end raised.
SR500
88-00 (CV Carb) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable, decompression cable and brake cable. |*Install with the bar end raised.
TW200
-99 (Drum brake models) *Changing the throttle cable, clutch cable and brake cable is required.
TW225E
00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose.
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Universal
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Full width: 655mm
Effective width of holder installation part: 160mm
Pullback size: 95mm
Insertion angle: 18 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Nov 12, 2020
The GB250 I got was converted to the ugly Handlebar Up Type, so I bought it to revert to the OEM style.
This is a flat drag bar and almost the same shape as the OEM handlebar.
I found out after looking for it, but it's hard to find such a simple Single Letter Handlebar with a lineup.
I recommend this for older cars, but I think it's a good Part that will increase the various directions of Custom.
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Jul 22, 2013
It is flat as a name.Although attached to
w650, interference with a Tank is avoidable by a Limit.He had a feeling that the die length of the
Handle was a little short.The Handle extension Parts made from the
HURRICANE was stuck, and it became just right die length.
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Oct 11, 2011
It purchases for the change from an up handle.
Since it was easier to ride than the time of an up handle and width became short, pass through, and it comes to be easy and is GOOD.
(A long handle post is required to use it in the usual height.)
He carried a 6 inches [ I got the friend to yield ] curved type.
Review detail
