Looks like you access from European region.
Would you shop at webike.eu.com?
18.75 USD (2,989 JPY)
Delivery Information
This item is discontinued.
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
APE 50
08-12 (FI Drum brake models)*Processing of switch hole is required|*Clutch cable must be changed.
APE 50
-07|08 (Carburetor) *Only for APE100 (09-), it is necessary to drill the switch hole|*It is necessary to change the clutch cable.
APE 100
-12 (Drum brake models)*Processing of the switch hole is required for APE100 (09-) only|*It is necessary to change the installation of the clutch cable.
SR400
88-00 (CV Carb) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable, decompression cable and brake cable. |*Install with the bar end raised.
SR500
88-00 (CV Carb) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable, decompression cable and brake cable. |*Install with the bar end raised.
TW200
-99 (Drum brake models) *Changing the throttle cable, clutch cable and brake cable is required.
TW225E
00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose.
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Universal
Handlebar color: Black
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Full width: 670mm
Effective width of holder installation part: 160mm
Pullback size: 60mm
Insertion angle: 9 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Sep 8, 2021
Used for APE 100
Installed on Direct.comTop Bridge
I hesitated with Type 1, but I decided to use Type 0 which is the closest to Straight!
There is a Mini type in the type 1, and I was lost, but I think that everything probably interferes.
You can buy a Model 0 or Model 1 or both and still have a good cost.
SSC Cap is used for Bar End
No Weight, no problem.
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Jul 10, 2015
GB250 (89 years) I installed it..
It is necessary to open a hole to prevent slippage of the Switch box, but since Drill is borrowed at Home center, it did not matter so much.
When purchased in second hand, we had a higher Continental handle, but when replaced with Flat type, the whole image was tightened. The ride comfort was also light forward, making Knee grip easier.
In the future, we are considering installing Rear Sets.
Fits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Mar 27, 2015
Fabulous position, great on scooters too. Only additional risers added for better angles.more drag style angle. Product very solid.
View DetailFits:HONDA Ape 100 Ape 100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Jan 23, 2015
Fabulous perfect on PCX wit curve in risers making e handling much better making e posture either relax or sportier position. Very solid metal and black finished makes it looks fiercer. Solid handling and solid bar.
View DetailFits:HONDA Ape100 Ape100 -12 (Drum brake model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape50 Ape50 -07|08 (Carburetor model) *Requires switch housing hole drilling for APE100 (09-) only | *Requires rerouting of clutch cable, HONDA Ape50 Ape50 08-12 (FI Drum brake model) *Requires switch housing hole drilling | *Requires rerouting of clutch cable, HONDA FTR223 FTR223 (With side number plate) *Requires switch housing hole drilling | *Requires rerouting of throttle cable, clutch cable
Sep 18, 2017
I used it to change Bonneville to Millibar.
With trust Brand, making etc. There is no problem.
Because it does not suit Bonneville, I removed the Sticker.
Plating is a bit overshadowed on the body of Black so I regret only if I should have done Black.
Review detail
