Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
/
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
  • Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Product # HB0064C-01

4.8 (5 reviews)

・This option is not available.

・Please select other options.

20.93 USD (3,337 JPY)

Webike Point: +167 pt  (1.04 USD)

Delivery Information

  • This item is discontinued.

Quantity
Ask about this product

FITMENT

HONDA

  • MONKEY

    09-12 (AB27-1900001-)(FI Vehicle)*Requires Top Bridge H30 Holder, or MONKEY Handle Holder|*Requires switch hole drilling

  • MONKEY

    84-07 (Z50J-1600008-,AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required.

  • CB400SF

    -98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)

  • CB1300SUPER BOLDOR

    10-12 *Processing of switch hole drilling required|* Side cap required (for inner diameter φ18mm)

    • See all HONDA
YAMAHA

  • SR400

    01-12 (Carb|FI Disc Brake) *Processing of switch hole is required.

  • SR400

    88-00 (CV cab models) *Processing of switch hole required

  • SR500

    88-00 (CV cab models) *Processing of switch hole required

  • XJR400R

    01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.

    • See all YAMAHA
SUZUKI

  • GSR400

    -12 *Ask to drill switch holes|* Normal side caps can be used.

  • GRASS TRACKER

    09-12 43355(FI cars)*Side caps can be used for stock.

  • GRASS TRACKER

    -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.

  • GRASS TRACKER Big Boy

    09-12 (FI car)*You can use stock side caps.

    • See all SUZUKI
KAWASAKI

  • ZEPHYRX

    *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)

  • ZRX400

    *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)

  • BALIUS2

    *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)

  • BALIUS

    91-94 *Processing of the switch hole is required|*Required side cap (for inner diameter φ18mm)|*Please raise the bar end.

    • See all KAWASAKI
Others

  • Universal

Open Fit Model Information Table

Product detail

[Handlebar color] Chrome plating

[Handlebar specification]
・Outer diameter Φ22.2mm / inner diameter Φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 35mm
Full width: 670mm
Effective width of holder installation part: 120mm
Pullback size: 130mm
Insertion angle: 20 degrees
Forward leaning angle: 45 degrees

*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.

*Images may contain other colorings and types..


For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.


Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.

Points of Attention

* If there may be an instruction manual included, it will be written in Japanese.

MODEL PAGE LINKS

HONDA
YAMAHA
SUZUKI
KAWASAKI

Customer Reviews

4.8 /5
(5 reviews)

5 stars

80%

4 stars

20%

3 stars

0%

2 stars

0%

1 star

0%

Write a Review
review banner

Reviews with image

And by the way.
I used it to lower the CB 223S Handlebar

HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI Drum brake models) Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Excellent

Jul 25, 2021

And by the way.

[How is it used?
I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!

Was the one you received as per Image?
While slightly lower than OEM, nothing wrong with that!

Was the installation difficult?
Although the Handlebar itself is not difficult to install, I wasn't sure whether or not to drill a hole in the Handlebar to fix the Switch, and as a result, I shaved off the protrusion around the Switch to install it!

How was your experience with it?
I'm uncomfortably Large satisfied!

[Included Parts:were they on?
It wasn't attached.

View Detail
And by the way.
Helpful?

HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI Drum brake models) Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Excellent

Feb 6, 2019

Hurricane bar

Excellent low profile bars if you're looking for low rise. Beautiful finishing and good quality, solid handling. I truly like the look

View Detail
Hurricane bar
Helpful?

HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI Drum brake models) Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Excellent

Mar 6, 2016

I used it to lower the CB 223S Handlebar

We also need to exchange Handlebar weight.
For details click here → "Our CB 223S" http : / / cb223s. web. fc2. com / Please refer to.

View Detail
I used it to lower the CB 223S Handlebar
Helpful?

HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI Drum brake models) Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Excellent

Nov 6, 2015

These are excellent quality handle bars. The handle bars feel very sturdy and well-made. The quality of the chrome on the handle bars is excellent as well; there are no visible blemishes, marks, or scratches on the chrome whatsoever. Excellent value for mo

These are excellent quality handle bars. The handle bars feel very sturdy and well-made. The quality of the chrome on the handle bars is excellent as well; there are no visible blemishes, marks, or scratches on the chrome whatsoever. Excellent value for money overall, and much cheaper and much better constructed when compared to buying handlebars from the UK or the USA.

View Detail
These are excellent quality handle bars. The handl...
Helpful?

HURRICANE

Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) Ape 100 (09-) only: Requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI Drum brake models) Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Very Good

May 14, 2012

Although the Forward Conti of the same HURRICANE was used before, since it was a Makeover, it changed into the Flat-continental 4 type.In
height, although it seldom changes to a Forward Conti, since Flat-continental 4 type is close to a Flat, it is n

Although the Forward Conti of the same HURRICANE was used before, since it was a Makeover, it changed into the Flat-continental 4 type.In
height, although it seldom changes to a Forward Conti, since Flat-continental 4 type is close to a Flat, it is necessary to lengthen with an arm near at hand, and becomes with some [ nature and ] anteversion.
The Brake and Clutch side has a Tank and in addition last-minute Hoses, and the Position change for the upper and lower sides of Levers is in the state which is not made at all.
It is as having planned a Position and appearance and satisfied anyway.

View Detail
Although the Forward Conti of the same HURRICANE w...
Helpful?

Full Custom Build Inspiration

See all
KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



Review detail

Scroll to Top
Scroll to Top