Timing was not available for Tommaselli, so I bought it in time
The looks and Position are great, but … it won't pass inspection. w
Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
28.07 USD (4,474 JPY)
Webike Point: +224 pt
(1.4 USD)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
MONKEY
09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
-
MONKEY
84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
-
APE 50
-07|08 (Carburetor)*APE100 (09-) only
-
APE 50
08-12 (FI Drum Brake) *Processing of switch holes is required
See all
HONDA
YAMAHA
-
SR400
88-00 (CV carburetor) *Processing to drill switch holes is required
-
SR400
01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
-
SR500
88-00 (CV carburetor) *Processing to drill switch holes is required
-
XJR400R
01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
See all
YAMAHA
SUZUKI
-
GSX400
05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
-
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
See all
SUZUKI
KAWASAKI
-
ZEPHYRX
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
BALIUS2
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
BALIUS
91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
-
ZEPHYR400
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
See all
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 35mm
Full width: 645mm
Effective width of holder installation part: 155mm
Pullback size: 130mm
Insertion angle: 43 degrees
Forward leaning angle: 167 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![It attached to 250TR. <br>It is a swallow type quickly [ equipped also with the back step, since he wanted to carry out by / appropriate for a cafe racer /, also considered the separate handle, but ] as a preceding paragraph story for becoming inclined att](https://st-img.webike-cdn.net/st/photo/article/47/1300693516347M.jpg)
Fits:HONDA CB400SS CB400SS * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA FTR223 FTR223 (With side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA FTR223 FTR223 (Without side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA NC700S NC700S 12 (Excluding ABS/DCT models) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter) | * Requires changing the orientation of the brake banjo., HONDA VTR250 VTR250 03-07 (1020001-) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)
Jul 23, 2022
Helpful?
Fits:HONDA CB400SS CB400SS * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA FTR223 FTR223 (With side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA FTR223 FTR223 (Without side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA NC700S NC700S 12 (Excluding ABS/DCT models) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter) | * Requires changing the orientation of the brake banjo., HONDA VTR250 VTR250 03-07 (1020001-) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)
Sep 26, 2020
Easy to separate handle style.
It was used in BALIUS?
I was thinking of using Separate Handlebars, but I heard that the Separate Handle might cause the Clamp to slip and dent the Tank or pinch my fingers when it falls over, so I chose this Handlebar which has no worry about that.
There is no need for any modification other than the holes for the Switch box, and the wires can be used as they are from OEM. The setting range is quite wide, from 0 to plusmn; I think 20 degrees is possible. I installed it and visually confirmed that the Tank does not seem to touch the road surface when it falls over.
It might feel a little bit tired for some people because the bike leans forward a little bit, but it feels a little bit easier on the highways because it keeps the position of the body from being pulled back when the wind hits it.
The Grip is much more angular than the OEM, making it easier to twist the Axel and open it all the way.
There is a space to install the Controller of Grip heater and a clock in this model. Moreover, I am glad that this is a longtime seller model.
Helpful?
Fits:HONDA CB400SS CB400SS * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA FTR223 FTR223 (With side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA FTR223 FTR223 (Without side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA NC700S NC700S 12 (Excluding ABS/DCT models) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter) | * Requires changing the orientation of the brake banjo., HONDA VTR250 VTR250 03-07 (1020001-) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)
May 12, 2017
I installed it in the 2004 model SR 400.
It is an exchange from OEMHandlebar. I wanted to lower Position because it looked cool, so I introduced it. I think that it will be as low as the company's Flat continental. The wrist is tight until you get used to it because there is squeezing angle so far, but Position was as you intended.
View DetailHelpful?
Fits:HONDA CB400SS CB400SS * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA FTR223 FTR223 (With side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA FTR223 FTR223 (Without side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA NC700S NC700S 12 (Excluding ABS/DCT models) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter) | * Requires changing the orientation of the brake banjo., HONDA VTR250 VTR250 03-07 (1020001-) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)
Aug 31, 2015
HURRICANE Swallow Φ7/8 inches Handlebar
I had trouble with Separate handle I made Swallow handle because the price is cheap. I do not know the OEM's Handlebar Clamp (Handball Clamp of SetBack of mine) There was nothing to hit Tank I was worried about. I drew a full eye and gaps between Tank and Handlebar were 1 pc finger I could not accept the reverse attachment.
Handlebar Clamp 1 cm to 2 cm Up I want to attach without Back.
Helpful?
Fits:HONDA CB400SS CB400SS * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA FTR223 FTR223 (With side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA FTR223 FTR223 (Without side number plate) * Requires switch housing hole drilling | * Requires rerouting of clutch cable and choke cable., HONDA NC700S NC700S 12 (Excluding ABS/DCT models) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter) | * Requires changing the orientation of the brake banjo., HONDA VTR250 VTR250 03-07 (1020001-) * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)
Apr 22, 2013
custom-made one of SR400 -- it is a purchase
Cool at business! The
Wire and Hoses are pure and it arranges them.
Helpful?
Full Custom Build Inspiration
