Condor Φ7/8 Inch Handlebar Steel

Excellent appearance & operability

Fits:HONDA Ape 100 Ape 100 -12 (Drum brake models) * Requires switch housing hole drilling only for APE100 (09-), HONDA Ape 50 Ape 50 -07 / 08 (Carburetor models) * Requires switch housing hole drilling only for APE100 (09-), HONDA Ape 50 Ape 50 08-12 (FI drum brake models) * Requires switch housing hole drilling, HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 05-09 * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter), HONDA CB1300 Super Bol D'or CB1300 Super Bol D'or 10-12 * Requires switch housing hole drilling | * Requires side caps (for Φ18mm inner diameter)

Japanese Webike user

Excellent

Mar 10, 2022

[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.

Was the one you received as per Image?
The precision of the construction is good and the shape is cool.

Was the installation difficult?
It was the first time for me to replace the handlebar, so I had to remove and install the switch, fine-tune the angle of the handlebar, etc. The drilling of the holes for the switch box was done by a nearby motorcycle shop.

How was your experience with it?
With the OEM Handlebar, it seemed a little far away, but now that the Throttleetc. is in front of it, it is much easier to ride.
Curve also feels easier to turn.

[Included Parts:were they on?
None in particular

[Was there anything that disappointed you?
None in particular

Other items that would be helpful
Point or hang of installation:Anyway, it is to do fine-tuning repeatedly.
If you add a Switch box, you should fine-tune it, if you add an AxelSlot, you should fine-tune it, and repeat until you are satisfied.

Helpful?

Japanese Webike user

Excellent

Mar 3, 2022

Thoughts.

Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used to it.

If you are going to reverse mount it, CondorSW looks better without interference to Tank. The product itself is very good, so it depends on how you attach it.

I only reverse-mounted it, so just for reference, Accelerator Wire and OthersWire can be used as they are. However, I think it would be better to change the wires if possible, since they seem to be in pain. The same can be said for any handlebar replacement, but I think a drill is necessary because it is necessary to drill holes to fix switches.

Helpful?

Japanese Webike user

Excellent

Apr 12, 2021

Cool

The installation was no problem and I like using it without feeling any fatigue.

Helpful?

Japan User(translated)

Very Good

Jan 6, 2017

Ideal for me

Separate handle is stiff forward.
But, I want to Custom!
So, select CondorType.

Even with Normal handle comparison, the forward tilted posture does not change much, and there is no need for Rear Sets.
It is exactly right for age.

As the Handlebar End got down, the clearance with the Tank when the Handlebar was turned off became narrower, but none won.

It was a little troublesome to drill a hole in the Handlebar with Switch related installation.

Looks like it feels like a Custom feeling.

Helpful?

Japan User(translated)

Excellent

Nov 7, 2016

Cool! Easy to drive!

We are riding the ZrX400 of the 2006 year formula.
Condor Handle interferes with Bikini cowl etc etc. I listen but I was able to install it without problems.
Clear the Handlebar Clearance with Tank Thumb 1. Adjust with a gap of about 5
HandlebarRight Side's OEMBrake fluidTank? Felt it was Limit.
Hose and Wire were still OEMs and there was no particular problem.
It is necessary to open the hole for fixing Electrical Switch Series by yourself.
Exchange time required time about 1 hour

Driving situation
Thinking from Bar handle, it makes me feel a bit cramped, but for someone I like it does not accumulate.
GSXetc. It feels like Separate handle.
Corner is also easy to bend (There are individual differences) I feel like it got it..
Mirror became easier to see also the arm became low!