Looks like you access from European region.
Would you shop at webike.eu.com?
40.86 USD (6,513 JPY)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
glom
13-17 JC61
glom
13-17 JC75
CB400SF
99-13 vtec II
CB400SF
99-13 vtec III
XJR1300
98-16
MT-03 (2015-)
16 RH07J
MT03
FZS1000 FAZER
01-05
GSR750
11-16 GR7NA
GSR400
06-16
GSX1400
01-08
GSX400
94-08 GK7CA S
Black Anodized Aluminum
Machined aluminum alloy
Socket bolt with cap
25mm taller than stock
Φ22.2mm universal type
Compatible models do not require replacement of cables (with stock handlebar)
Compatible screw hole pitch: 31.5-35mm
**Ensure there is at least 25mm of extra length in the cables when the handlebars are turned fully left or right.
[Regarding the notes for compatible bikes]
For bikes marked with *1 in the compatibility chart, the front side will bottom out with the included bolts, so two additional M8 x 50mm socket bolts are required.
For bikes marked with *2 in the compatibility chart, the cables must be removed from the guide (see image).
*Images are for reference only.
*Images may contain other colorings and types.
*There may be changes in product specifications due to the manufacturer's reasons..
HURRICANE general information page
Please make sure to check the product details here..
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
![CB400SF was attached and used.
From the first, although the Position was not tight, he thought ... with it being easier, and it attached.
Of course, attachment is also easy! Exchange of the Cables of others [ this Parts ] is unnecessary.
A Position also be](https://st-img.webike-cdn.net/st/photo/article/49/1332832978449M.jpg)
Fits:HONDA 400X 400X 13-15 NC47, HONDA CB1000SF CB1000SF 92-98 SC30, HONDA CB1100 CB1100 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 14-22 SC65 (ABS models compatible *1)
Jul 13, 2021
I used it on my MT-03.
It can be installed without any problem.
Because I used it in combination with EZ-FIT BAR this time.
Throttle Cable is no longer delivered.
In this case, it can be processed or long cable can be used.
In addition, the MT has a matte finish near the Top Bridge.
Only this product will be LusterLuster.
Fits:HONDA 400X 400X 13-15 NC47, HONDA CB1000SF CB1000SF 92-98 SC30, HONDA CB1100 CB1100 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 14-22 SC65 (ABS models compatible *1)
Jun 22, 2018
Because the Handlebar was somewhat low and cramped feeling, I bought it for a little up.
Regarding the installation system, the original Clamp and Up Spacer's SIDE do not become Tsurishi,
It looks a little disappointing.
Although the shape and feeling of use are good, I feel that the price is a bit high compared to the product.
It's okay for Handlebar to up by 25 mm with Bolt On ? ? ?
Fits:HONDA 400X 400X 13-15 NC47, HONDA CB1000SF CB1000SF 92-98 SC30, HONDA CB1100 CB1100 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 14-22 SC65 (ABS models compatible *1)
May 17, 2015
The ride Position became easier.
MT of NC 700 S (No ABS) It installed in
Since I did not meet a subtle tilt posture for some time before, I first attached Low Seat
Somewhat better footsteps and somewhat improved Position, but thanks to the installation of this product, it became pretty good personally.
I became a training car, but it became easy to ride very easily so I am satisfied with Large
Although it may be individual differences, there are individual differences, but as far as reference is concerned, handling of Cable somewhat can not afford, but it did not do any special handling.
Fits:HONDA 400X 400X 13-15 NC47, HONDA CB1000SF CB1000SF 92-98 SC30, HONDA CB1100 CB1100 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 14-22 SC65 (ABS models compatible *1)
Jun 27, 2013
Since the Handle of the FTR Standard could not ride easily low a little, when it attaches, it becomes exactly good height and is satisfactory.If there is that [ H20 place ] since it is almost hard-pressed although
Cables were exchange needlessness, I will think that it is still better.
Fits:HONDA 400X 400X 13-15 NC47, HONDA CB1000SF CB1000SF 92-98 SC30, HONDA CB1100 CB1100 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 10-16 SC65 (ABS models compatible *1), HONDA CB1100 I CB1100 I 14-22 SC65 (ABS models compatible *1)
Jun 4, 2013
I felt that a Handle was somewhat far from me of prudent 165? and the Showa form, and it attached and saw this product.
attachment is easy and it ends it in 10 minutes.Although it thought that the Handle became this side for a while, and became easy, while driving about all day long, it came to feel sense of incongruity somehow.It is not so easy as it expected as the body occurred and weight (it is not as American) was concentrating on the hips since the
Handle became this side, and I think that the direction of the posture in which weight is too distributed for a while by both arms suits, and have returned now.The
goods themselves are firm things and it thinks that it becomes an Items effective in a person with a far Handle truly.
Review detail
