I had to process the Harness in order to take a signal from the ECU, but as I was worried about having to finger with it being attached to the car body, I knew that there was a special tool to cut the covering and purchased did
【Items】
- 0 by sqSize. 2 to 6. It is possible to cut the cover up to 0. In addition to Harness itself Cut and crimp can also be done ... probably not used ( - ω - )
- Spec. I do not know if it is a price or a price, but the side sandwiching Harness and the side of cutting do not move at the same time, and the side of Cut moves late
- There are two Springs for opening and closing, there are holes to catch the protrusion and the other on the back, so grasping the Grip is somewhat consolidated
【Cut】
- Try it 0. 3 sq and 0. When I saw the Harness of 5 sq in between, I was able to cut the coating so as to get through with the sponge. Electric Works Pliers did not cut the cover easily, so I was touched by the presence of such a convenient tool
- In Electric Works Pliers, in addition to the process of pulling the cover after sandwiching Harness, the core wire is also damaged and the finish is not Beauty. If it is a Wire stripper, it will be finished in Beauty just by inserting it, and work speed will also rise
- Cut side will move behind late, if you do not grasp it firmly it opens without bite Harness and fails to cut the covering. Left hand opposite to dominant hand gripped remarkably when grasping by hand
- WiringCut of the ECU which is also the purpose of purchase ... Although it was hard to work due to the recessed place, it was able to safely caut and it got a signal
Looks like you access from European region.
Would you shop at webike.eu.com?
