Looks like you access from European region.
Would you shop at webike.eu.com?
32.97 USD (5,256 JPY)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
Ape 50
(AC16-1600001-) (FI)
Ape 50
(ac16-1000001-1599999)
Ape 100
(hc07-1000001-)
XR100 Motard
(HD13-1000001-)
Flat head screw included
Drill diameter 2.5mm included
** Modification of the orifice section is required.
* May not be compatible with vehicles equipped with clutch covers other than the stock clutch cover or SP Takegawa clutch cover.
* Depending on the lot, products may be delivered with labels showing old prices or old JAN codes prior to price changes..
Click for product search form
Click here for PDF instructions(* opens manufacturer's PDF file.)
SP Takegawa's Web Catalog(*Jump to the manufacturer's site.)
(*This information is current as of December 1, 2012.Please note that there may be some changes in specifications and prices.)
5 Disc Strengthening Clutch Kit (Part Number:02-01-0310) is here.
.
Increases oil circulation to provide enhanced cooling for engines with increased heat generation due to tuning such as displacement upgrades.
Oil pump discharge volume comparison vs. stock:
Ape50: 106% increase
Ape100: 25% increase
Simultaneous installation with SP Takegawa 5-Disc Reinforced Clutch Kit (P/N: 02-01-0310) changes the primary reduction ratio (approx. 16% higher gearing), which increases the oil pump rotation speed and further increases oil discharge volume.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA Ape Type D Ape Type D (AC18-1000001-) (FI), HONDA Ape100 Ape100 (HC07-1000001-), HONDA Ape100 Type D Ape100 Type D (HC13-1000001-), HONDA Ape50 Ape50 (AC16-1000001-1599999), HONDA Ape50 Ape50 (AC16-1600001-) (FI)
Apr 2, 2022
This is a great upgrade over the stock pump, comes with everything but a cover gasket and is very easy to install. This is the pump that hinda should have used.
View Detail
Fits:HONDA Ape Type D Ape Type D (AC18-1000001-) (FI), HONDA Ape100 Ape100 (HC07-1000001-), HONDA Ape100 Type D Ape100 Type D (HC13-1000001-), HONDA Ape50 Ape50 (AC16-1000001-1599999), HONDA Ape50 Ape50 (AC16-1600001-) (FI)
Sep 4, 2019
I use it to prevent heat dripping
The heat of the engine of APE that was bored up is too much, and the heat drip measure and prevention of galling of the cam I purchased the Oil pump kit as an oil pump to the Head from the OEM Oil pump In the case of the 50cc Crankcase, the Oil passage is widened and enlarged It is necessary The hole was expanded with the attached drill Because the hole is a stop, it is better to use a manual hand drill than to use a power tool Please rinse off the powder after removing BALI The effect of using this product is still unknown, but even if you drive about 500km in midsummer No outbreaks of Cam scuffing etc I think you can rest assured
View DetailFits:HONDA Ape Type D Ape Type D (AC18-1000001-) (FI), HONDA Ape100 Ape100 (HC07-1000001-), HONDA Ape100 Type D Ape100 Type D (HC13-1000001-), HONDA Ape50 Ape50 (AC16-1000001-1599999), HONDA Ape50 Ape50 (AC16-1600001-) (FI)
Jul 9, 2019
I don't feel the effects, but it's a relief
I bought it in conjunction with the Bore up of the APE 50. oil pump change is Bore Up KitManufacturer recommendation, HeadCam protection, Engine cooling It is necessary for the improvement of efficiency The effect of this product may not be obvious, but I bought it for the peace of mind of this summer
View DetailFits:HONDA Ape Type D Ape Type D (AC18-1000001-) (FI), HONDA Ape100 Ape100 (HC07-1000001-), HONDA Ape100 Type D Ape100 Type D (HC13-1000001-), HONDA Ape50 Ape50 (AC16-1000001-1599999), HONDA Ape50 Ape50 (AC16-1600001-) (FI)
Aug 31, 2017
Must be required after Bore up?
Purchase because hot water temperature rose after Bore up
Gasket of Clutch cover is also prepared and it installs! It is a hard time to peel off the old Gasket .... Two to three times of desorption of Oil pump was spent on Gasket processing ... lol
Since the hot water temperature after the exchange visibly lowered after exchanging, the effect is perfect!
Mr. Takekawa's product is described in detail in the Instruction Manual so it really helps
Fits:HONDA Ape Type D Ape Type D (AC18-1000001-) (FI), HONDA Ape100 Ape100 (HC07-1000001-), HONDA Ape100 Type D Ape100 Type D (HC13-1000001-), HONDA Ape50 Ape50 (AC16-1000001-1599999), HONDA Ape50 Ape50 (AC16-1600001-) (FI)
Nov 6, 2015
I remove the footpeg of Right Side, I remove the Clutch cover and exchange, but the exchange itself is not difficult. I think that there is no problem if you apply Drill little by little Orifice diameter enlargement Large. The most troublesome thing is to peel off the old Gasket. It took longer than exchange work.
View Detail
Review detail
