Non-Melting Bike Cover Half Type 7L

Name: Non-Melting Bike Cover Half Type 7L
Brand: unicar
SKU: 21001068
Price: 86.38 USD
Availability: OutOfStock
Rating: 3.0 (1 reviews)

Product # BB-709

3 (1 reviews)

Tariff-Free

86.38 USD (13,770 JPY)

Webike Point: +138 pt (0.86 USD)

Delivery Information

If manufacturer have in stock, ships around 4th Jul. 2026

Quantity

Ask about this product

Can't Find them? Quote to us

FITMENT

HONDA

FUSION SE
FUSION TYPEX
FORZAZ
FORESIGHT

YAMAHA

MAXAM
GRAND MAJESTY
MAJESTY

SUZUKI

SKYWAVE250 burgman
SKYWAVE400 burgman
SKYWAVE650 burgman

KAWASAKI

Epsilon

APRILIA

ATLANTIC500

KYMCO

XCITING250
GRAND DINK250Z

Open Fit Model Information Table

Product detail

■Size 7L
With rear box
Size: Overall length Approx. 255 x Overall height 155 x Overall width 110 x Tail width (upper) 58 x Tail width (bottom) 58 x Tail height 140cm
Comes with a storage bag

**The surface melts in the heat.Please be careful when covering.
*The shape of the body of a motorcycle varies greatly depending on the model.The dimensions shown are for reference only.
*The product may not be applicable to some models and years.
*If your vehicle is not listed in the application chart, please refer to the dimensions of each part or contact us.
*We do not accept returns after opening the package or installation.
*The cover article is waterproofed on the surface, but because it is sewn, rainwater may penetrate through the seams.Not fully waterproof.
*The lifetime of the cover depends on the climate and operating conditions.Regardless of the period of use, if the water repellency of the cover decreases significantly, it is the end of its life and you should purchase a new product.
*Be sure to remove the wet cover and dry both the bike and the bike cover before use.Leaving the paint on the surface for a long time can damage the surface of the paint and cause rust and mildew.
*When repainting, make sure that the paint is sufficiently dry before covering.(Dry for 3 months for normal paint and 6 months for metallic paint.)
*In case of strong wind, there is a possibility that the wind chill may enter into the bike cover, so please take enough care of it including prevention of falling.
*We are not responsible for any accidents caused by inadequate use or natural disasters (typhoons, etc.).
*There may be changes in product specifications due to the manufacturer's reasons.
.

* The image is only for reference. The image shown may differ from the actual product.

There are many people who have had the experience of melting a conventional body cover when it was applied to a hot exhaustThis non-melting motorcycle cover is perfect for anyone who has ever experienced this.It is effective not only for exhaust but also for engine heat.Other than the fact that it doesn't melt, it is made with great care and attention to detail.The outer surface of this bike cover is made of thick ox 300D fabric for practicality and durability.A one-touch anti-flying belt is attached to the center part.In addition, there are four large keyholes in the front and rear that can be fitted with locks of 70mm diameter, so that the front and rear can be distinguished by color.You don't need to spread out the bag to check which side is the front, and it is also highly effective in preventing both theft and wind skipping.

★Product Features★
●The cover is made of a new material with heat resistant finish, so it can be used even when the exhaust and exhaust pipe are hot after riding.
●The front side is red and the rear side is black, so you can easily identify the front and rear of the cover.)
●Equipped with one-touch wind skipping prevention belt (belt can be adjusted from either side)
●With comfortable air ventilation near the left and right mirrors, it keeps the inside comfortable by letting moisture inside the cover escape.It is effective in preventing rust from occurring due to moisture.
●Includes a storage bag for the vehicle body cover