Looks like you access from European region.
Would you shop at webike.eu.com?
26.01 USD (4,146 JPY)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Includes: Double-sided tape (30 x 20 mm)
Power harness length: 1500 mm
Peak voltage memory function
Dimensions: 42 mm (W) x 25 mm (H) x 10.8 mm (D)
LCD: Standard
Backlight: White/Red LED (Red at low voltage)
Operating voltage: DC 7.5V-18.0V (Meter power input)
Measurement voltage: DC 7.5V-18.0V
Current consumption: 0mA (OFF) / Max 50mA (ON)
Operating temperature: -10 to +60 degrees Celsius
Waterproof rating: IPX7 equivalent
** Not compatible with 2-stroke motorcycles due to excessive electrical noise.
* While this meter features a waterproof structure, rapid changes in outside temperature may cause condensation inside the panel.
* Simultaneous installation with ignition enhancement parts or H.I.D. units generating high voltage may cause display errors due to noise interference.
* Designed exclusively for DC 12V systems. Cannot be installed on AC 12V, battery-less, or DC 6V motorcycles.
* Specifications are subject to change without notice due to manufacturer requirements..
This digital voltmeter turns on and off in conjunction with the ignition key and directly measures voltage across the battery terminals.
By changing the connection point of the measurement wire (red), it is also possible to monitor voltages other than the battery, such as accessory power sources.
The white backlight ensures visibility at night. Additionally, the unit is equipped with a battery alert function that switches the backlight to red when the voltage drops below 12V. Energy-saving design with 0mA consumption when the meter power is off.
Reviews with image
Jul 28, 2022
Mounted on ZX-6R G type
I had a D-UNIT WR from DAYTONA before.
I installed it on this.
Since D-UNIT has a built-in Relay, I connected the AttachmentPower Supply Cable and the Power Supply Cable of this voltmeter together by crimping them together.
May 30, 2022
The price is reasonable and it is useful to know the voltage in real time.
View DetailMar 13, 2022
I have used it on 3 motorcycles and 1 car and it has not broken when used on motorcycles and my car has been through 2 mid-summer and it has not broken at all. The waterproof treatment is very clean and the product itself is solid, not cheap. Wiring is also very easy, so I highly recommend it.
View DetailFeb 11, 2022
More peace of mind at this price!
In the winter, I was concerned about the battery voltage because I wear electrically heated Wear.
Since it is a Liter machine, I don't think I need to worry about it so much, but since it is invisible, I am a little worried.
It's not expensive, so I installed it as a DIY project.
I have a DUnit set up, so I just need to connect the acc wires from there to the battery. The installation itself can be done in 10 minutes. In order to hide the wires, I removed the cowl and put it under the tank, and struggled for about an hour.
The three wires from the power supply are thin and RoseRose (not bundled into one pc), so I used Vinyl Tape to tie them together. If I don't, I'm worried that they might break under the tank.
I used Surface Fastener to place it near the meter, and it's compact and fits well.
Now that I can visually check the voltage, I feel more secure.
Nov 6, 2021
The display screen is large and easy to read. I purchased this product because I thought that if there is an electrical failure, the first thing I would check is the battery. I think it is a good product because I can always check the strength of the battery and it is very clear at a glance.
View Detail
Review detail
