Looks like you access from European region.
Would you shop at webike.eu.com?
223.94 USD (35,700 JPY)
Delivery Information
In Stock : 1 left, Ships within 48 hours.
Estimated arrival date around
[Set components]
・Machined caliper support
・Machined torque rod
・Torque Rod Mount (or Torque Rod Mount Plate) Main Unit
**Calipers are not included.Please purchase separately if you need it.
*The image above is for GPZ900R.
*The air will not be completely released when the caliper is in the downward position.As shown in image 3, be sure to move the caliper to the upper part of the disc and temporarily fix it with cable ties to prevent it from falling before releasing the air.
*Please be sure to bleed the air with the brake disc in between.
*Whether to install
Exhaust series
・PMC, Midnight, Moriwaki, etc. exhausts and short tubes: Available (The torque rod mount plate needs to be installed in the mounting hole of the exhaust bracket that is currently installed.)
・Z racing exhaust: (If the exhaust is removed, it can be installed.)
Swingarm
・Swingarm with sway bar: (Extend a rod about 15mm in diameter straight out from the surface of the rear disc of the wheel currently installed, about 15mm out from the surface, to the front of the swingarm.You can install the stabilizer if it does not interfere with the bar.)
・ZRX400 swingarm: Not available
*In the case of stock wheels, there may be problems due to compatibility, but aftermarket wheels can be installed without problems.
・ZEPHYR 1100 stock wheels: Need little adjustment
・ZEPHYR 1100RS stock wheels: 〇
・ZZR1100C stock wheels: Need little adjustment
・ZX-10 stock wheels: Not available
・GPZ1100 stock wheels: Not available
Not available: Not fit.
△: It can be installed by cutting the back side of the caliper.(See image 4)
Available: It fits fine.
.
Brembo calipers can be installed on almost all wheels, including aftermarket wheels such as Marvic, Gale speed, Marghesini, Mag Forge, and stock wheels!!!
A rear brake kit that combines Brembo 2-pot calipers with machined caliper supports and machined aluminum torque rods mounted on the frame.
Please prepare caliper, brake hose, crush washer, banjo bolt for Brembo and brake fluid separately.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:KAWASAKI Zephyr 750 Zephyr 750
Oct 26, 2018
SpecificationsEngineerRing's products
You are attentive.
You can change Rear's Brake around with Total, so when you change to brembo, Caliper, MASTER did it all at once.
Design is also Refreshing and I like it.
Review detail
