Looks like you access from European region.
Would you shop at webike.eu.com?
133.96 ~ USD (21,355 JPY)
Delivery Information
Please select product form first.
**The shift shaft is short and not long enough for this product to be installed, so it is necessary to remove the parts in the front sprocket cover and replace the shift shaft, which requires work experience.
(Parts replacement procedure)
After removing the sprocket cover, remove the front sprocket, starter, water pump and alternator.After removing the cover behind the front sprocket, the shift shaft can finally be replaced.Please consult your local bike shop or someone with experience before purchasing as these steps are required.
*If your engine is ZZR1100C/D, ZX-10, GPZ1100, GPZ1000RX, ZRX1100/1200, you do not need to do the above.Part Number: Please purchase 30391 / 30392.
*If the vehicle height has been raised significantly by extending the long free length shock for 17 inches and reversing the eccentric, the chain will strongly interfere with the main unit during engine braking and the function will be impaired within 1000km.If your vehicle is too high, please install with care.
*A part of the stock F sprocket cover needs to be modified.
*When using F sprocket covers other than *Spec Engineering, it is necessary to cut the collar for the shift shaft support (approx. 10mm) and tighten it together with the F sprocket cover.
*There may be changes in product specifications due to the manufacturer's reasons..
Uncertain shift operation of the stock shift becomes light and accurate!
This is a bolt-on kit that includes the support kit and the long shift shaft.
・This is a functional part that improves the shift feeling by supporting the rattle of the shift shaft externally with high-precision bearings, which is a weak point of NINJA engines.
・It can not only improve the shift feeling, but it can also significantly reduce the elements that damage the transmission by installing it to prevent shift mistakes.
It is also a very important part for those who want to keep their engine in better condition for a long time.
・This product can also be installed on bikes with down tubes (GPZ900R only).
(Active, Nitro Racing, Sidewinder, etc.)
This part attaches to the shift shaft under the F sprocket.(See image)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:KAWASAKI GPZ750 R GPZ750 R, KAWASAKI GPZ900 R GPZ900 R
Apr 16, 2019
It's a personal Recommendation!
When installed, the OEM Sprocket cover is relatively easy to install, except for the machining required for the You can install or install
The effect is that the fee-ringing in Shift operation will change dramatically
In addition, it is also possible to prevent oil leaks around Shift at the same time, so it is possible to use the NINJA-type engine is Recommendation
Review detail
