High Power Ignition Coil 0. 7 Ω Dual lead
High Power Ignition Coil 0. 7 Ω Dual lead
/
  • High Power Ignition Coil 0. 7 Ω Dual lead
  • High Power Ignition Coil 0. 7 Ω Dual lead
H.Craft

High Power Ignition Coil 0. 7 Ω Dual lead

Product # W-1513-P19395624

3 (2 reviews)

・This option is not available.

・Please select other options.

72.26 USD (11,520 JPY)

Webike Point: +115 pt  (0.72 USD)

Delivery Information

  • This product is produced on order.

Usually takes around 10 days to ship.

Quantity
Ask about this product

FITMENT

HONDA

  • CB400TII CB400T

  • CB400 SUPERHAWKIII CB400D

  • CB400T CB250N

  • CB400T CB250T

    • See all HONDA
YAMAHA
SUZUKI

  • RG250 γ

  • RG500γ (Gamma)

  • RG400

Open Fit Model Information Table

Product detail

For CDI ignition vehicles
0.7Ω Dual

[Size]
・Coil unit: 70mm x 49mm x 73mm
・Iron core: 117mm
・Mounting pitch: 2 locations 90mm and 102mm

[Components]
・Dust boots (for the number of outputs)
・2 terminals
・Wiring 1set
・Bolt long x 2pcs
・Bolt short x 2pcs
・4 spring washers
・4 washers

**The coil itself is a universal coil, so it may require some modifications such as making a bracket depending on the model.
*Applicability is partial and can be used for all vehicles with CDI ignition and two plug cord output.
*Please do not install unless you are an experienced person who can judge the quality of the electrical components such as stator coil.
*If the ground wire on the vehicle side is defective, or if you use a battery made overseas, the charging voltage will not rise and the regulator will be damaged early.
*Please be sure to measure the charging voltage after installation..

Standard ignition coils have a spark voltage of about 15000V, but the high power ignition coil generates a high voltage of about 30,000V, which is about twice as much as the standard ignition coil,
It produces a strong spark from low to high RPM without losing fire.
This powerful spark is expected to increase both power and torque.
The torque, especially at partial throttle opening, was felt in most of the test vehicles.
If you replace the old stock coil, it will change the fuel condition.

[How to find the right coil]
Measure the resistance value of the primary side of the ignition coil that is currently installed with a tester.
If the resistance value is within ±0.5ohm of the stock coil, you can use it.
If you are not sure about the fitment, please contact us after measuring the resistance value of the coil on the vehicle side.
Please note that if your vehicle has a resistor in the wiring before the ignition coil, but the resistor has been removed.

Different resistance values (Ω) for the same model are considered to be compatible, but the values are within the allowable range in the manual and based on H.Craft's experience.
Increasing the resistance value → The durability of the coil will increase, but the spark will become weak.
Lower the resistance value, the spark will be more powerful, but the durability of the coil will decrease.

The following is a guide for each coil.
Point Ignition Vehicle 4Ω-
Igniter ignition vehicle 1.5-4Ω
CDI ignition vehicle 0-1.5Ω

Can be installed on vehicles with direct ignition coils.

Points of Attention

* If there may be an instruction manual included, it will be written in Japanese.

MODEL PAGE LINKS

HONDA
YAMAHA
SUZUKI

Customer Reviews

3.0 /5
(2 reviews)

5 stars

50%

4 stars

0%

3 stars

0%

2 stars

0%

1 star

50%

Write a Review
review banner

Reviews with image

H.Craft

High Power Ignition Coil 0. 7 Ω Dual lead

Fits:HONDA CB400 SUPERHAWKIII CB400D , HONDA CB400 SUPERHAWKIII CB400N , HONDA CB400T CB250N , HONDA CB400T CB250T , HONDA CB400TII CB400T

Excellent

Apr 20, 2022

Outstanding ignition power

It is fully compatible with NORMAL. In parallel, we use SplitFire's TwinCorePlug cord.
Even when Idling, which had a tendency to lose fire, it seems to be ignited reliably and is stable.
When the Axel is opened, the PowerFeel is a world apart from the deteriorated NORMAL parts.
The drawback is that the CoilUnit is large, so it is necessary to remove the tank when replacing the plug.
Plug replacement from the Center cowl side is not possible.

View Detail
Outstanding ignition power
Helpful?

H.Craft

High Power Ignition Coil 0. 7 Ω Dual lead

Fits:HONDA CB400 SUPERHAWKIII CB400D , HONDA CB400 SUPERHAWKIII CB400N , HONDA CB400T CB250N , HONDA CB400T CB250T , HONDA CB400TII CB400T

Terrible

May 11, 2021

Despite the conformity guarantee:、、、、、、

There is a description of Manufacturer's fitment and WEBIKE's fitment guarantee, but it cannot be installed including the surrounding area which is very Large than OEM. I made a return request after purchase, but it is not accepted initially. Reply. We'll have to get creative with the racket. The answer is "Yes. The answer is "yes". I do a little bit of BKT processing, and if it is cutting, hole processing, welding, etc., I will do it. However, even if I complained that the body was too large and there was no mounting space including the surrounding area, it was a return. It finally became the return correspondence after exchanging several times. Even after the return correspondence, it is still selling it now with the indication of the same conformity guarantee, but it is doubtful whether this is good.
It is more compact than the OEM product, and with a little bit of BKT processing, I was able to install it and it worked fine. It is more compact than OEM, and it was installed with a little bit of BKT processing.

View Detail
Despite the conformity guarantee:、、、、、、
Helpful?

Full Custom Build Inspiration

See all
KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



Review detail

Scroll to Top
Scroll to Top