Looks like you access from European region.
Would you shop at webike.eu.com?
20.8 USD (3,316 JPY)
Delivery Information
This item is discontinued.
Compatible Tires: 10 inch - 19 inch
**When using the rear wheels, apply the front brake and when using the front wheels, apply the rear brake, as the bike may not be stable and there is a risk of falling.If the rear brake is a foot brake, use it in gear.
*If the work place is slippery, this product may shift.If it is slippery, please use it on a mat or other non-slip surface..
Simple wheel maintenance tool!
Useful for wheel washing and chain maintenance on bikes without a centre stand.
The roller width can be adjusted in three steps, so it is suitable for a wide range of wheel diameters from 10 to 19 inches.
The rollers have built-in bearings to ensure smooth rotation of the tires.
The ramp makes it easy for bikes to get on and off.
Non-slip rubber on the back of the stand and on the slope.
Reviews with image
Dec 7, 2022
Về chất lượng và kết cấu rất phù hợpVề trải nghiệm sử dụng tốtVề kiểu dáng thiết kế đẹpVề bảng đo size vừaGiá thành và so với các sản phẩm khác ko đắt lắmVề vận chuyển và đóng gói kĩMọi lời khuyên hoặc lưu ý khi mua hàng
View Detail
Dec 20, 2021
Enough for chain cleaning/adjustment and rear wheel washing.
This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.
Nov 21, 2021
I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.
May 3, 2021
It takes more strength than you think to turn it.
I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.
Apr 18, 2021
I want to make chain refueling easier since there is no main stand.
I'm not sure if it's because I'm not used to it or because it's too heavy to turn the tire.
View Detail
Review detail
