Looks like you access from European region.
Would you shop at webike.eu.com?
Product # SBNR060
4.5 (4 reviews)56.05 USD (8,935 JPY)
Delivery Information
In Stock : 1 left, Ships within 72 hours.
Estimated arrival date around
MONKEY
99-17 AB27 *Mount heat sink in reverse orientation *Heat sink angle adjustment required
APE 100
02-16 HC07 *Mount heat sink in reverse orientation
SUPER CUB110PRO
09-11 JA07 *Install heat sink in reverse direction *Heat sink angle adjustment required
ZOOMERX
13-16 JF52
Color: 6000K (White)
Power consumption: 20W (High) / 15W (Low)
Operating voltage: Both DC and AC
Lumen: 2600 lumens (High) / 2000 lumens (Low)
Product Life: 50000 hours
1 year from the date of purchase
[Set components]
・LED Bulb x 1
・Pedestal fixing ring x 1
・Valve Spring x 1
・SST x 1
・Controller x 1
・Gibboshi x 3
・Binding bands x 2
・Double-sided tape x 1
・User's Manual (Warranty)
**Please refer to the "Fitting List by Model" for compatibility information.
*Modification or separate parts may be required depending on the model.Please check the compatibility of your vehicle.
*There are some models that cannot be installed, so please check carefully before ordering.
*This product is only for motorcycles with a displacement of 249cc or less and a headlight power source of DC or AC.Do not use this product for any purpose other than motorcycles.
*Please check the shape of the valve before purchase.
*The specifications and appearance of the products are subject to change without notice.
*The brightness and color values on the product pages are an image of the difference between each product, which is difficult to understand on paper.This may differ from the actual product.Please refer to the values of product specifications (general performance values such as power consumption) as a guide.
*The color of the product may differ slightly from the actual color due to printing.
*Product prices and designs are subject to change without notice.
*PH7 / PH11 / PH12 are product names and PH is a registered trademark of M&H Matsushima Co.
*The values are standard values and are not guaranteed..
* The image is only for reference. The image shown may differ from the actual product.
[3-sided light emission for comfortable light distribution]
Wide illumination is possible by adopting 3-sided illumination.
In addition, the reflective range is sufficient for high beams.
[assisted high beam function]
An "assisted high beam function" is implemented to slightly turn on the low beam at the same time when the high beam is switched, thereby securing the front side of the driver's field of vision.
High beam visibility is much more comfortable.
[Designed for minibikes]
・Optimized size
Optimized size for minibikes with small space.
So it is easy to replace and install on any vehicle.
・Angle and orientation can be adjusted
When fixing the bulb, the angle and direction of the heat sink can be adjusted to avoid interference with the vehicle side wiring and peripheral devices such as the rear of the light case.
・Fully compatible with AC power supply
The controller is equipped with a high-performance capacitor that can handle a wide voltage range of up to 160V, and can be used for both carbureted and fuel injection vehicles as well as battery-less vehicles.
・High power LED made by CREE
Compact size, multi-faceted light emission, and high power LED (XP-G3) made by CREE which is durable and bright.
[Simple product configuration]
Simple product configuration for smart installation.
Because the harness is long, the controller can be fixed to any position such as the front cover or the frame.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA APE 100 02-16 HC07 *Mount heat sink in reverse orientation, HONDA MONKEY 99-17 AB27 *Mount heat sink in reverse orientation *Heat sink angle adjustment required, HONDA SUPER CUB110PRO 09-11 JA07 *Install heat sink in reverse direction *Heat sink angle adjustment required, HONDA ZOOMERX 13-16 JF52
Sep 29, 2020
It was missing parts, but otherwise I was happy with it.
I was going to install it, but there were not enough parts, so I inquired about it, but there was no answer, so I bought it separately and installed it.
Battery replyThe performance itself was satisfying as it worked properly in the car and was very bright.
I gave up because I thought I had pulled a haGap for the missing parts.
Fits:HONDA APE 100 02-16 HC07 *Mount heat sink in reverse orientation, HONDA MONKEY 99-17 AB27 *Mount heat sink in reverse orientation *Heat sink angle adjustment required, HONDA SUPER CUB110PRO 09-11 JA07 *Install heat sink in reverse direction *Heat sink angle adjustment required, HONDA ZOOMERX 13-16 JF52
Sep 1, 2020
It is a valuable AC power supply compatible product, and is a great help in preventing overloads in small-type battery vehicles such as mopeds.
In addition, since there is a Connector in the middle of Wiring of Valve and Controller, and it is easy to pass it through the headlight case, workability is good, but since the heat exhaustion part protrudes quite a bit in the back, when there is much Wiring, it is necessary to pay attention.
I don't care about light distribution because it depends on the case.
At any rate, thank you, Sphere Light!
Fits:HONDA APE 100 02-16 HC07 *Mount heat sink in reverse orientation, HONDA MONKEY 99-17 AB27 *Mount heat sink in reverse orientation *Heat sink angle adjustment required, HONDA SUPER CUB110PRO 09-11 JA07 *Install heat sink in reverse direction *Heat sink angle adjustment required, HONDA ZOOMERX 13-16 JF52
Oct 29, 2019
Satisfied with the brightness of the head lamp with LED
It's been over 20 years since I bought it, but it had 800 miles on it in April and now has 2000 miles on it
I've been doing maintenance on it this year to use it to get my kids to school, mainly for wear and tear parts
The consumable parts used OEM parts, but the head lamp was DMR's for brightness Lens
Initially, we used bright Halogen bulbs, but no matter how hard we tried, they illuminated the road surface There is a limit to the brightness, and cars nowadays are brighter and brighter with LEDs and Discharge The headlamps are the mainstream, and the moped Level Halogen has a white brightness around it The decision to switch to LEDs was made because they would be buried in I did
The installation was as follows
Product Composition
Packaging, Instruction Manual, Included Parts All is well
2 ◎ Installation of LED Lamp
Included Parts:The Socket part of Spring is long, so that the Socket is It needs to be adjusted while cutting little by little without going in
From the beginning, Spring's One Side has been in a cut state (touching at a point, not flat) A little frustrated
Installed with no problem except for the adjustment by turning off the spring
I inserted/rotated the LED bulb into the socket part, but I couldn't fix it with the Snap, so I had to use my hand When you move the bulb part with the:Pair (for Left and Right) It moves to
As a single ORing supports the socket and the bulb, please improve the reliability Part
LampRear's Boots is a Standard Product that has been partially cut out and processed Installed
3. Installation of ControllerUnit
Double-sided in front of the Speedometer Tape and Tie Wrap to secure it perfectly
4. Actual running
Both in daytime and at night, they make their presence known without glare to other cars Amazing difference!
The road surface is brightly illuminated even though we drive at night on dark roads with few street lights Very reassuring!
High beam on dark roads with no oncoming traffic, brightening up the road ahead and It also illuminates Low beamZone at the same time The most Large advantage of this LEDLamp! Even the kids are LARGE satisfied!
Since power consumption is low, other lights, including the head lamp in Idling, can be fully lit There is a (Meter internal light and Tail/Stop-lamp are LED, Blinker is (NORMAL)
Fits:HONDA APE 100 02-16 HC07 *Mount heat sink in reverse orientation, HONDA MONKEY 99-17 AB27 *Mount heat sink in reverse orientation *Heat sink angle adjustment required, HONDA SUPER CUB110PRO 09-11 JA07 *Install heat sink in reverse direction *Heat sink angle adjustment required, HONDA ZOOMERX 13-16 JF52
Aug 4, 2018
At first we installed an inexpensive LED of about 1,600 yen, the Low beam came down in about a month and it got broken, even if it was slightly high I installed and found a certain Manufacturer item.
There is no problem using 2 months. A one-year product warranty and easy-to-follow Instruction Manual will still give you a sense of security.
Even with mopeds, the LED becomes bright enough, and AssistHigh beam is also effective.
The challenge is price.
Review detail
