Looks like you access from European region.
Would you shop at webike.eu.com?
95.55 USD (15,232 JPY)
Delivery Information
This item is discontinued.
Color: Silver
Handlebar mounting holes: 22.2
Mirror mounting holes: 10mm
**When you replace the lever holder with a light clutch lever holder, if your bike has a stock lever switch, the wiring for the stock holder will also be disconnected from the main harness, so the starter will not work even if you hold the clutch lever and press the starter button.
*Therefore, if you connect the two wires from the main harness directly, the starter will turn.
*If the wiring is not disconnected, it is necessary to modify the wiring, so please have it installed at a motorcycle shop.
*Please note that if the clutch wire itself is rusted inside and the movement of the bike is heavy, it will not become lighter unless the wire is replaced with a new one.
*When installing the clutch wire, first make sure that the clutch wire has the maximum amount of space before installation, otherwise the wire will become flat and cannot be installed.
*Please adjust the space of the wire to normal condition after installation again.
*This product cannot be installed on Honda or other vehicles with an integrated left switch box.
*Uninstallable models (CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / All HAWK series models etc.).
This is a clutch lever holder that applies the "principle of leverage" to lighten the touch of the clutch lever.You will feel "much lighter".
The lever moves 90 degrees when pushed outward by hand, which prevents the lever from breaking in the event of a fall.
The distance to the lever can be easily adjusted by adjusting the bolt attached to the lever.
By turning the shuriken-shaped part, you can easily adjust the play of the wire.
All bolts are made of stainless steel, so they will not rust.
Karukura is a registered trademark of BRC.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA FX , HONDA GP , HONDA GPZ
Mar 29, 2022
Yes, it is lighter. It was damaged 3 days after installation and when I inquired about it, I was told it could not be handled. It is a complete GarbageParts.
View Detail
Fits:HONDA FX , HONDA GP , HONDA GPZ
Oct 20, 2018
It is combined with PMCEasy Clutch Kit
The item to compare is Unicorn's Clutch
Lightness same etc. Level is available and price is cheaper than half price
But it is certain that the difference between the price of Unicorn's items and the feeling of handy comes out!
Unicorn's Clutch has almost no up and down play shake with grip and release
BRC's Clutch has some play and its side is from the beginning
If you use BRC you may have felt 100 points perfect
Mr. BRC is definitely above Cost performance
This time Unicorn's Lever did not have Silver, so I tried to purchase it
It is no mistake to say that good products are comprehensively good
I do not have such a high price, so I would like to teach around Wire-type Clutch as well
The installed Motorcycle is Z1 but those who do not want to be hydraulic at that time at that time Still in other Motorcycle Weight of that Clutch I am giving up I am giving up I am giving up Firstly I will change the touring comfort!
By the way, it became the lightness that can be grasped with one Z1 finger!
Review detail
