Looks like you access from European region.
Would you shop at webike.eu.com?
3.97 USD (633 JPY)
Delivery Information
In Stock, Ships within 48 hours.
Estimated arrival date around
SUPER CUB 50
All models of AA09
CT125CT110 HUNTER CUB
All JA55 models
CT125CT110 HUNTER CUB
All JA65 models
SUPER CUB110
All JA59 models
[Specification]
〇 For stock throttle holders only
〇 Compatible grip length 120mm
〇 High throttle (compared to stock)
・Super Cub 50/110 (AA09/JA44): Up about 3%.
・Super Cub 110 (JA59) ・ Dio 110 (JK03) ・ PCX125 / 150 (JF81 / KF30): Up about 10
・CT125 Hunter Cub (JA55/JA65), ADV150 (KF38): About 20% increase
・PCX125/160(JK05/JK06/KF47):Approx. 30% increase
**Cannot be used on Super Cub Pro and Cross Cub.
*Cannot be used on Super Cub Pro and Cross Cub.
*Handle grip is required separately.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The stock throttle pipe is integrated with the grip, so it is not easy to change the grip.
KITACO's Super Throttle Tube is a similar throttle tube to the stock designed to accept aftermarket grips.
It is recommended to replace the grip at the same time when using.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA ADV150 KF38, HONDA CT125CT110 HUNTER CUB JA55/JA65, HONDA DIO110 JK03, HONDA PCX125 JF81/JK05-1000001-1199999/JK05-1200001-, HONDA PCX125-E HEV JK06
Jul 23, 2022
Used in CT125.
I replaced it to reduce the burden on my Right wrist when touring.
It's great because it makes city driving easier and the price of the product is low.
However, it seems a little long for CT125, so I cut it with a little nipper.
Fits:HONDA ADV150 KF38, HONDA CT125CT110 HUNTER CUB JA55/JA65, HONDA DIO110 JK03, HONDA PCX125 JF81/JK05-1000001-1199999/JK05-1200001-, HONDA PCX125-E HEV JK06
May 6, 2022
Replaced in conjunction with Grip replacement for CT110 HUNTER CUB
This product was installed in conjunction with the replacement of grips on a CT110 HUNTER CUB.
The OEM Throttle holder has a protruding
If you are replacing the Grip with a Universal Product Grip, you can replace it with a Throttle holder like this one.
Can be installed without modification.
Fits:HONDA ADV150 KF38, HONDA CT125CT110 HUNTER CUB JA55/JA65, HONDA DIO110 JK03, HONDA PCX125 JF81/JK05-1000001-1199999/JK05-1200001-, HONDA PCX125-E HEV JK06
Apr 10, 2022
This is High Solo by KITACO, a long-established 4MINI company.
Acceleration is possible with little twisting.
It is suitable for keeping cruising speed when touring, etc., rather than revving at high rpm.
good point
The only thing that needs to be done is to change the throttle holder to High Solo.
The range of the Accelerator operation has been expanded, making it easier to maintain speed.
Cheap.
Mounting accuracy is not bad.
A bad point
● No.
SmallEngine Displacement VolumeMotorcycles like CUBs tend to have a small Axel range, so the Accelerator operation tends to be busy.
I would like to RECOMMENDATION to those who want a little more room.
Fits:HONDA ADV150 KF38, HONDA CT125CT110 HUNTER CUB JA55/JA65, HONDA DIO110 JK03, HONDA PCX125 JF81/JK05-1000001-1199999/JK05-1200001-, HONDA PCX125-E HEV JK06
Nov 2, 2021
I bought this product because I can't install the Grip heater on my ADV150 because the Throttle of NORMAL has a slippery surface.
It will be 20% High Solo! I could have left Throttle's take-up diameter as it was, but I ended up with a High Solo.
After changing the grip, I went to work and the High Solo effect made it easier to drive.
If you compare it with NORMAL, I think there are some parts to care at low speed, but it's not a problem because ADV150 is not so light Throttle in the first place.
The Throttle Wire of ADV150 is very tight, so it's not easy to install after removing it.
Fits:HONDA ADV150 KF38, HONDA CT125CT110 HUNTER CUB JA55/JA65, HONDA DIO110 JK03, HONDA PCX125 JF81/JK05-1000001-1199999/JK05-1200001-, HONDA PCX125-E HEV JK06
Jun 24, 2021
I bought it to convert to High Solo, but the JK05 didn't change it at all.
View Detail
Review detail
