Looks like you access from European region.
Would you shop at webike.eu.com?
250.38 ~ USD (39,914 JPY)
Delivery Information
Please select product form first.
MONKEY125
18- (JB02 / JB03)
MONKEY125
18- ABS (JB02 / JB03)
Rated Voltage: DC12V
Power consumption: Hi beam 30W / Lo beam 30W
LED: CREE XLamp XP-L LEDs
Color Temperature: 6000K / 3000K
model number
・3000K = LBH-H22
・6000K = LBH-H21
**Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.PROTEC will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
.
It is much brighter than the stock LED!
LED Bulb Headlight Conversion Series.
・More than 3 times brighter than stock!
32.400 candela!
・Multi-reflector lens specification!
・The color temperature is 6000K white and 3000K halogen color!
■Do you feel that the stock LED headlights are too dim?
18- The stock LED headlight Lo beam on MONKEY 125 is on at 10.1W and is as bright as a halogen bulb.
If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED.
Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED.
This product enables you to install our H4 LED bulb by replacing the headlight unit, and the headlight will be reborn many times brighter.
■Clear multi-reflector lens
The LED base is placed horizontally on the lens surface of the stock LED headlight, so it is heard that many users feel uncomfortable with the design of the headlight.
The familiar multi-reflector lens can be used to create a clean look and feel.
The headlight is almost the same size as the stock one, so it is perfect for the MONKEY125 and has a good balance.
■Available color temperatures are 6000K and 3000K
Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 32,400 candela.
The optical axis can be adjusted to the standard range without shifting.
PROTEC has introduced BANZAI's HT-322 headlight tester to measure during development.
■Adoption of reliable CREE LED!
A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
■Waterproof electric fan cooling
A really bright LED generates heat due to the large input current and becomes hot.
In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan.
It is essential equipment to maintain stable brightness.
■Hi beam indicator can be turned on!
By removing the stock LED headlight, the Hi beam indicator will no longer be illuminated, but PROTEC's unique control system allows the Hi beam indicator to be illuminated.
■Easy to install!Bolt-on
The necessary tools for installation are a + screwdriver (No.2 and No.3), hexagonal wrenches 5mm, 10mm & 12mm sockets, nippers, pliers and electric pliers for crimping the bullet terminal.
How to remove and install the cowl is clearly explained with color pictures in the instruction manual.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA MONKEY125 18- (JB02 / JB03), HONDA MONKEY125 18- ABS (JB02 / JB03)
Jul 20, 2022
Purchased and installed at a certain motorcycle accessory store. Immediately after installation, the Lens fogged up and emitted a yellow color.
The product was defective and was replaced by the Manufacturer, but the product sent back had the same problem.
Seriously, I'm disappointed.
Review detail
