Grip Heater GH10 with Integrated Switch 120mm

Material: Rubber (Heated Grip)
Handlebar Diameter: 22.2 mm
Power Consumption: 7.4W (Level 1) to 34.8W (Level 5) at 13.5V
Grip Length: 120 mm
Internal Grip Length: 117 mm
Max Grip Diameter: 32 mm
Contents: Grip Heater Unit, Throttle Adapters, Installation Parts, Manual

** Not recommended for motorcycles with low power generation capacity as it may result in insufficient heating and battery drain. Please check your vehicle power output before installation.
* For fuel-injected motorcycles with computer-controlled power management, ensure connection to a power source that is not subject to current limiting to prevent power cut-offs.
* Use caution when connecting to vehicles with LED tail lamps or anti-theft systems such as immobilizers.
* Never connect to thin-gauge wiring (such as that used for LED lamps) to avoid abnormal overheating.
* Exercise extreme caution when connecting near the key cylinder on vehicles with immobilizers to avoid malfunctions or computer failure.
* This is a consumable product. Replace if the heat sheet surface shows scratches, cracks, or signs of wear.
* Heating the grips before installation makes the rubber expand and facilitates easier mounting.
* Depending on the handlebar design, this universal product may be loose or difficult to install. Modifications such as shaving the mounting surface or adding handlebar padding may be required for a secure fit.
* Some 2-stroke models with single-pull throttle systems may require modification for installation.
* Do not activate the heater immediately upon engine start. Allow the engine to warm up and ride for 5-10 minutes before activating.
* Power consumption: 7.4W (Level 1) - 34.8W (Level 5) at 13.5V.
* On some vehicles, power to accessories may be automatically cut during high-RPM operation or due to system design, which may stop the heater. Please be aware of this potential power drop.
* Additional spacers may be required when used with stock bar ends.
* This is a universal product. Compatibility information is based on grip length and dual-cable throttle systems. Please verify your internal switch box, grip length, and handlebar size prior to installation. Compatibility is not guaranteed for every vehicle.
* Not compatible with electronic throttle or throttle-by-wire systems.
* Installation requires removing the switch box and wiring to a stable voltage source. If you are uncertain, we strongly recommend professional installation by a qualified mechanic or dealer.
* Due to variations in switch box dimensions and throttle stroke, modification of the grip sleeve may be necessary. We strongly recommend consultation with a qualified mechanic.
* Designed to be compatible with most stock bar ends, but some exceptions exist. If incompatible, additional modifications such as handlebar replacement may be required to maintain legal vehicle width.
* Performance may vary based on motorcycle size, age, and electrical system condition. Reduced power, delayed heating, or limited usage at high speeds may occur. If you are not satisfied with potential performance variance, please consult your local dealer before purchasing.
* Specification change regarding indicator lamps (September 22, 2023): White LED no longer blinks upon ignition; Low voltage warning is now indicated by a blinking red LED instead of purple.
* Images may contain other products.
* Product specifications are subject to change without notice..