Looks like you access from European region.
Would you shop at webike.eu.com?
59.19 USD (9,436 JPY)
Delivery Information
This item is discontinued.
●Height adjustment in 7 steps (every 20mm)
●Compatible with 7 sizes of stems (Φ13 / Φ15.5 / Φ18 / Φ20 / Φ22 / Φ24 / Φ27)
●Load capacity: 200kg
●Size: Width 410 x Depth 680 x Height 770 to 870 (mm)
●Weight: 7kg
●Size when folded: (W) 500 x (D) 440 x (H) 670 (mm)
**The dimensions are measured in the vertical direction and vary depending on the caster angle.
*This product cannot be used for vehicles that do not have a hole in the bottom of the steering stem.If hoses or cables interfere with this product, please move them before use.
*For safety reasons, use with a rear stand.
*Assembly tools are not included.
*There may be changes in product specifications due to the manufacturer's reasons..
Front stands are useful for removing wheels and forks for maintenance.
Lift up by inserting it into the hole in the steering stem shaft.
Compatible with 7 sizes of stems by using the pre-installed 13 square and 6 sizes of stem adapters (15.5, 18, 20, 22, 24, 27 square).
The height of the stand can be adjusted to 7 levels, so it is suitable for various types of bikes.
Reviews with image
Jul 28, 2022
I am satisfied with my purchase.
I purchased this product for MotorcycleMaintenance Nans.
I've also purchased for Rear before and found it to be of good quality and easy to use.
We chose the sameSeries.
There is no problem with the quality etc. of this one, and the condition in which it was sent to me.
There was no problem
I'm satisfied
Jul 6, 2022
Note that some vehicles are not available.
Be careful when the bottom of the Cowl lifts the SS system! It will hit the bottom of the cowl just before it goes up. It is difficult to stop because it is just before it goes up, and a large motorcycle will break into balibali, so use a JTrip!
The product description also notes that if the Hose or Wire is hit, but...
When I first bought it, it was working fine on my MT09, but when I hit the bottom of the cowl on another vehicle, I discovered that I could not use it, and the return period was over. I didn't know that there are vehicles that can't use the product because it is not sold separately!
In my Image, it was DAYTONAUp with good cosmetics, but the thing still became a second-rate product.
Feb 22, 2022
I can't replace the tire because the axle shaft is stuck in the front up position. If you want to remove the wheel on CB1000R, please use another company.
View DetailJan 12, 2022
I wondered if it would really work, but then I tried it. It worked (laughs).
However, I was trying to pull out the Axle Shaft on the front, but depending on the position, the STAND interfered with it and I couldn't pull it out.
Maybe it was the 12-inches MONKEY that had to be raised higher than necessary?
However, it's much cheaper than other front stand products, and I think it's a good deal.
Jan 8, 2022
I used it on my GSX-R125, and although the OEM cowl slightly hits the standdbody, I was able to use it. multiple attachments are included, and I think the cost is good.
View Detail
Review detail
