Looks like you access from European region.
Would you shop at webike.eu.com?
8.53 USD (1,360 JPY)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
CB400SF
99 NC39 [Frame No.]NC39-1000001 to 1007220 [Parts used]Caliper side
CB400SF
98-21 NC31 Ver.S [Frame No.]NC31-1600001 or later [Use part]Caliper side
CB400SF
99-07 NC39 [part used]Caliper side
CB400SF
95 NC31 [Frame No.]NC31-1300001 or later [Application area]Caliper side
YZF-R1
98 [part used] caliper side
YZF-R1
99 [part used] Caliper side
YZF-R1
10 [Where used] Caliper side
YZF-R1
11 [Frame No.]RN24J- [Where used]Caliper side
GSX-R750
90-20 [Frame No.]GR77AC-100264 or later [Location]Caliper side
GSX-R750
91-20 [Frame No.]GR77AC-101577 or later [Fitting location]Caliper side
GSX-R750
88 [Frame No.]GR77C-100001 or later [Used for]Caliper side
GSX-R750
89 [Frame No.]GR77C-103093 or later [Location]Caliper side
ZX-6R
99 [ZX600][Frame No.]ZX600G [Spot]Caliper side TOKICO 6POT(For right side)
ZX-6R
97 [ZX600][Frame No.]ZX600F [Usage part]Caliper side TOKICO 6POT(For right side)
ZX-6R
98 [ZX600][Frame No.]ZX600G [Place of use]Caliper side TOKICO 6POT(For right side)
ZX-6R
10 [ZX600][Frame No.]JKAZX4R1-AA019001 to 025000 [Where used]Caliper side TOKICO 6POT(for right side)
For stock rubber cap
Stainless steel
M8 x P1.25
1pc
For NISSIN, Sumitomo, Brembo (standard installation type for Japanese stock vehicle), Tokico 6POT (some)
For hydraulic clutch side
Proper stock breeder part number : 43056-1052, 43056-1055, 43056-1056
*Please make sure to check the screw diameter and pitch./ Appropriate Genuine Breeder Part No.: 59121-01A00
*Please make sure to check the screw diameter and pitch./ Appropriate Genuine Breeder Part No.: 36Y-W0048-00, 1NL-W0048-00
*Please make sure to check the screw diameter and pitch./ Appropriate Genuine Breeder Part No.: 22866-mf2-711, 43352-568-003
*Please make sure to check the screw diameter and pitch./ daytona 6 / 4pot cast / machined model / proper stock bleeder Part No.: 43056-1052, 43056-1055, 43056-1056
○Mainly NISSIN 6POT bikes and KAWASAKI series TOKICO 6POT bikes fit the right side caliper.On the left is M7 x P1.0(For ZR x 400 / 2 (TOKICO 6POT 98-) , M7 x P1.0 is suitable for both side./ Appropriate Genuine Breeder Part No.: 59121-01a00, 59123-03fa0, 59100-03870
*Suzuki series TOKICO 6POT is compatible with M7 x P1.0 type.
○ainly suitable for domestic genuine Brembo calipers, Nissin calipers./ Appropriate Genuine Breeder Part No.: 3yk-w0048-00, 1j3-w0048-00, 26h-w0048-00, 1uy-w0048-50
○Mainly suitable for domestic standard Brembo caliper bikes, Sumitomo caliper bikes./ Appropriate Genuine Breeder Part No.: 43352-568-003
*Breeder stock part number 43352-MG9-006 type cannot be installed because it uses O-rings and has a long length.Depending on the year, CBR750F, NSR250R, VFR400R (NC30) , Steed400 etc. are applicable, please check the genuine part number.
○ainly suitable for Nissin caliper vehicles..
*The same part number can be installed on the rear caliper side or other models.
*Please make sure to check the screw diameter and pitch.
*Be careful not to over-torque the caliper side and aluminum cap when tightening.
*The stock part number may be integrated with other part numbers by the manufacturer.Even in this case, the dimensions remain the same and can be used.
*Please check the stock part number in the parts list or check the measurements before purchasing.There may be differences in the dimensions of the same model year.
*Compatible models are basically the names of vehicle up to 2000.The 2001 model has not been confirmed even with the same name.
It is possible to replace the stock air bleeder, which is made of steel and prone to rust, to prevent problems such as sticking and dress up.It is especially recommended for high quality calipers such as Brembo and Nissin calipers.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:HONDA AX-1 87 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 87-94 MD21 [part used]Caliper side, HONDA AX-1 88 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 89 MD21 [Frame No.]MD21-1100001 or later [Use part]Caliper side, HONDA AX-1 90 MD21 [part used] Caliper side
Nov 14, 2021
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. Don't forget to bleed the air and refill the fluid in the MASTER after replacement.
View DetailFits:HONDA AX-1 87 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 87-94 MD21 [part used]Caliper side, HONDA AX-1 88 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 89 MD21 [Frame No.]MD21-1100001 or later [Use part]Caliper side, HONDA AX-1 90 MD21 [part used] Caliper side
Jul 18, 2021
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to be honest.
I bought it more for corrosion protection, so I'm happy with it.
Fits:HONDA AX-1 87 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 87-94 MD21 [part used]Caliper side, HONDA AX-1 88 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 89 MD21 [Frame No.]MD21-1100001 or later [Use part]Caliper side, HONDA AX-1 90 MD21 [part used] Caliper side
May 31, 2021
If you want to buy an OEM, buy this one.
I bought this as a replacement from OEM
very high (Lol) Expensive for nothing. (Lol)
The color of 64Titanium material of the same size is SilverTitanium and about 1000 yen.
Quantity Stainless this time:2pc. I bought a set.
I also bought the 64Titanium and am waiting for it to arrive!
I may return this one depending on the decidedly texture!
Fits:HONDA AX-1 87 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 87-94 MD21 [part used]Caliper side, HONDA AX-1 88 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 89 MD21 [Frame No.]MD21-1100001 or later [Use part]Caliper side, HONDA AX-1 90 MD21 [part used] Caliper side
Jan 9, 2020
CYGNUSxInitial Model (SE12J), if it's the same Caliper model, this The product fits
I couldn't find anything that looked like a match and it was a no-go, but it was OK with no problems
It is recommended to use about 3 rolls of seal tape for water supply if possible
Airtight and waterproof
The OEMs are going to be gobbling up Breeder in Rust early, but
This one will free you from that worry I know it may seem expensive
With this machining accuracy and if you want to replace a few of them with OEM Parts, I feel that the cost is good
Fits:HONDA AX-1 87 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 87-94 MD21 [part used]Caliper side, HONDA AX-1 88 MD21 [Frame No.]MD21-1000020 to 1010713 [Parts used]Caliper side, HONDA AX-1 89 MD21 [Frame No.]MD21-1100001 or later [Use part]Caliper side, HONDA AX-1 90 MD21 [part used] Caliper side
Jul 5, 2017
If you know this product sooner
The shape of the tip is slightly different from OEM. I feel a sense of incompatibility when I put on Rubber cap.
Seal tape winds in the reverse direction, not in the tightening direction.
Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.
By the way, by wrapping a Seal tape, it seems that it is possible to prevent the Brake fluid from bleeding out of the thread during the air removal work.
I wrote it as a reference, since I did not write to absolutely roll it, I thought whether it is not necessary to wind Tape.
Review detail
