POWER Clamp Bottle Cage

【Deciding factor of purchase】
INAZUMA250 (GSR250) Because I can not put things anywhere with Naked type, I decided to purchase it for testing.

【Description of item】
It is a Universal Drink Holder.. I mounted it with an Engine Guard of about 28 φ in between the type to be clamped and clamped by Pipe at the clamp and like the image. There is no backlash Firmly I am sticking. However, as time goes by, it gets loose with nature, so it is necessary to periodically retighten tightening inspection. By the way, although you can rotate the Drink holder section, you can only turn 90 degrees with a cross groove. Vertical is considered only horizontal mounting.

[Material]
The - Plastic (Black)
It is crappy ← It is suitable for price

【Actually using】
500 mL plastic bottle was too small to hold.
1. 5L plastic bottle can not be installed with Large rinse
DrinkBottle for Road motorcycle was just FirmlyHold done just fine
750 mL of the image's AquaBottle was the best Fit as if it were made for this product without Wobble.

【Review】
The aftertaste feeling is full as you can see.
According to how it looks a little poor. (^^;) If it does not bother you it is super convenient Items.

【What made you decide the purchase?】 In Motorcycle
I wanted a Drink holder when riding and it was also good as Cost so I bought it for purchase
【How was it actually used?】 I do not have to worry about loosening even with the vibration during running
[Others] Drink holder searching person! Cost, because it is also excellent in durability, this product Recommendation!

Until now I put Gasoline 's carrying can into Backpack or bound it to Carrier
If you are here ClampBottleGauge, you can easily go to various places
I thought that it could be installed, I tried purchasing.

Picture is YAZAWA's Fuel BottleM 70 with this Power Clamp Bottle Holder
It is a state attached to Front fork.

Either Handlebar or Fork, you can easily adjust the diameter and tightness
You can install it in various places in any Motorcycle.
There is a cross Slit at the joining part of the Clamp part and Body,
By loosening the screw you can change the angle by 90-degrees.
Conversely, it is not Free, but there is nothing to say that it turns loose by vibration.

Sponge to stick to Bottle and where this product hits, and Rubber sheet to paste to Clamp part
It comes separately.
The thought around here is good, unlike cheap!

Although it is a critical condition of wearing, it is too tight against Bottle, with moderate tightening
I do not seem to worry about dropping out.

It is quite good reputation among friends.
It seems there were various colors in the old days, but it is somewhat lonesome to have Black choice

I installed it using the KIJIMAEngine Guard of GSR 250.
Pipe diameter was about 28 φ It was able to attach firmly with the attached Clamp.

With 500 mL Plastic bottle there is a little room and it will rattle within the Holder.
I entered 700 mL of Drink Bottle for Road motorcycle and it became a good feeling without Wobble.
I was glad I bought it for easy hydration.
The price is also cheap and perfect.

Drink holders of various shapes are sold from multiple companies and there are many kinds, so just watching it makes it fun.
It is enough to combine magazine features gently with just Drink holder.

Especially, since this summer I feel that there are a lot of Riders attaching a Drink holder to the Motorcycle Handlebar.

Not only Tourer cars and Off cars, we also confirmed that the Handlebar also has a Drink holder on Ritter Over Naked, Harley-Davidson, and Full cowl's Racer replica.

Among them, there were many people who attached this ROUGH & ROADPower Clamp Bottle Holder with high probability especially after this summer.
I see that exactly the same product as this Loughlow Bottle holder changes only Package and sells it as 1400 yen under the name of another selling company, but the person I met buys the Power Clamp Bottle Holder sold by this ROUGH & ROAD Was.

This ROUGH & ROAD rough & Road Power Clamp Bottle Holder seems to be quite popular product.

As I mentioned above, the walls of Cool and dasa are gone, Rider who understood practicality is wearing this ROUGH & ROADPower Clamp Bottle Holder on my favorite car Handlebar.
I also did not like this ROUGH & ROADPower Clamp Bottle Holder somewhat disgusting at the beginning but now it's missing this ROUGH & ROADPower Clamp Bottle Holder in my Motorcycle Handlebar for Camping and long distance Touring died.

Just in the late autumn, I used a drink holder during driving because my drink during touring replaced me with Short size hot.
So it is about time to think about removing Maintenance from the Motorcycle Handlebar and removing Maintenance from each part after removing the ROUGH & ROADPower Clamp Bottle Holder and washing it in the early spring.

Truly, in cold we do not need this ROUGH & ROADPower Clamp Bottle Holder.
I do not deny anything that is dirty, and nothing I do not use is nothing than a disturbance.

However, it will be wearing while understanding that it is dasy because it is a handy item that is very handy when it comes to spring season.

.