Looks like you access from European region.
Would you shop at webike.eu.com?
6.13 USD (977 JPY)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
CB400 SUPER FOUR
17-21
CB400 SUPER FOUR
00-07
SILVER WING
05- NF01 Instructional vehicle 05.5- [displacement]400 [number of units required]2
CB125T
01- JC06 Instructional vehicle 01.3- [displacement]125 [number of units required]2
Stock Number: 3486
Shape: Threaded
Size:
Thread Diameter: Φ 10.0mm
Thread Length: 19.0mm (Half-thread type)
Hex Size: Hex 16.0mm
NGK Part Number: CR7EH-9
Type: Resistor Plug
Heat Range: 7
Compatibility Information: DENSO compatible: U22FER9
HONDA OEM Part Number compatible: 98059-57910 / 98059-57916 / 98059-57926
** Even if purchased in units of 10 (1 box), they will not be delivered in a single box.
* Terminals and tightening rotation angles may vary depending on the vehicle model. Please refer to the link for detailed compatibility and installation instructions..
* The image is only for reference. The image shown may differ from the actual product.
Provides stable ignition performance and combustion efficiency at an affordable price. Brings out the engine's original performance.
Features of Resistor Plugs:
Built-in ceramic resistor to suppress ignition noise generated during sparking.
- Suppresses ignition noise generated by sparks.
- Prevents radio frequency interference in car radios, mobile ham radios, and car phones. Also prevents malfunctions caused by noise in engine control computers.
* Effects may vary depending on the vehicle.
About Plug Terminal Shapes:
Please select the terminal shape that matches your engine and plug cord installation side.
Plug terminal shapes include "Integrated," "Separated," "Threaded," and "Punch-riveted."
Generally, "Integrated" and "Punch-riveted" are used for four-wheeled vehicles, while "Threaded" is used for two-wheeled vehicles. Plugs used for both four and two-wheeled vehicles may have a "Separated" configuration.
The "Separated" terminal part can be removed, but the "Integrated" and "Punch-riveted" terminal parts cannot. Forcing them off may break the terminal.
When using a "Separated" type as a "Threaded" type, remove the terminal nut.
If using with the terminal nut attached, ensure there is no looseness; if loose, tighten lightly with pliers.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
![Although the iridium plugs was attached last time, if it was right [ which is almost ineffective ], it considered that it was better to usually exchange plugs every 5000 K, and made it the ordinary plug this time. <br>Is that think that an engine starting](https://st-img.webike-cdn.net/st/photo/article/92/1330065747292M.jpg)
Fits:HONDA CB125T CB125T 01- JC06 Training vehicle 01.3- [Displacement] 125 [Required quantity] 2, HONDA CB400 Super Four CB400 Super Four 00-07 NC39 Training vehicle 00.2-07.12 [Displacement] 400 [Required quantity] 4, HONDA CB400 Super Four CB400 Super Four 17-21 NC54 Training vehicle 17.12- [Displacement] 400 [Required quantity] 4, HONDA CTX1300 CTX1300 14- SC74 14.2- [Displacement] 1300 [Required quantity] 4, HONDA Lead Lead 08- JF19 08.1- [Displacement] 110 [Required quantity] 1
Sep 18, 2020
I used it for LEAD110, but I could use it for more than 30,000 km without any engine trouble. There was a feeling that it seemed to be able to use it still, but the life span is long and costly though I changed it to avoid sudden trouble.
View Detail
Fits:HONDA CB125T CB125T 01- JC06 Training vehicle 01.3- [Displacement] 125 [Required quantity] 2, HONDA CB400 Super Four CB400 Super Four 00-07 NC39 Training vehicle 00.2-07.12 [Displacement] 400 [Required quantity] 4, HONDA CB400 Super Four CB400 Super Four 17-21 NC54 Training vehicle 17.12- [Displacement] 400 [Required quantity] 4, HONDA CTX1300 CTX1300 14- SC74 14.2- [Displacement] 1300 [Required quantity] 4, HONDA Lead Lead 08- JF19 08.1- [Displacement] 110 [Required quantity] 1
Apr 19, 2012
Standard and genuine. There is no particular point and this plug is enough for me. Iridium is expensive. Since an effect is not felt so much, either.
View DetailFits:HONDA CB125T CB125T 01- JC06 Training vehicle 01.3- [Displacement] 125 [Required quantity] 2, HONDA CB400 Super Four CB400 Super Four 00-07 NC39 Training vehicle 00.2-07.12 [Displacement] 400 [Required quantity] 4, HONDA CB400 Super Four CB400 Super Four 17-21 NC54 Training vehicle 17.12- [Displacement] 400 [Required quantity] 4, HONDA CTX1300 CTX1300 14- SC74 14.2- [Displacement] 1300 [Required quantity] 4, HONDA Lead Lead 08- JF19 08.1- [Displacement] 110 [Required quantity] 1
Feb 27, 2012
Although the iridium plugs was attached last time, if it was right [ which is almost ineffective ], it considered that it was better to usually exchange plugs every 5000 K, and made it the ordinary plug this time.
Is that think that an engine starting condition of the direction of a plug is usually good without knowing why only I?
Fits:HONDA Ape Ape 01-07 XZ50 AC16 01.2-07.12 Displacement: 50, Required Quantity: 1, HONDA Ape Ape 07- XZ50 AC16 07.12- Displacement: 50, Required Quantity: 1, HONDA Ape Ape 08- XZ50 Type D AC18 08.11- Displacement: 50
Installed on: HONDA SUPER CUB 50 (C50)
Jul 27, 2023
I used the part number on the old spark plug to order this one and it's exactly the same. It's a perfect fit and I'm very happy.
View Detail
Fits:SUZUKI GSX-R125 GSX-R125 18-21 DL33B 18.1- Displacement: 125, Quantity Required: 1, SUZUKI GSX-S125 GSX-S125 17-21 DL32B 17.10- Displacement: 125, Quantity Required: 1, SUZUKI SV650 SV650 16-21 VP55B 16.7- Displacement: 650
Installed on: SUZUKI SV650
Jun 7, 2023
한국에서 SV650 보유중인 오너입니다. 소모품 교환을위해서 주문했는데 중간에 공휴일이 낀관계로 좀 늦게받긴했지만 포장상태 물건상태 모두 마음에 들어서 순정부품 가격이 부담스럽다면 무조건 위바이크죠 앞으로도 자주이용할꺼 같네요
View Detail
Review detail
