High Speed Pulley with Weight Roller

I bought a Scooter for starters. So I bought a High Speed Pulley.
It's easy to just Replace with OEM Product.

But........the weight roller that comes with the pre-set is too heavy. The shift point must be moved to the high rpm side to some extent for High Speed Pulley, but the shift point does not change than I thought. As a result, I had to buy an additional weight roller.
Well, I think people have their own preferences about this place, so it's just for reference.

Устанавливал на Dio 68, прирост скорости 6-7 км.ч, ролики 6.5 гр, со старым ремнем, двигатель на максимальной скорости стал работать ровнее, на стоковом идёт в разнос. !!! Втулку нужно оставить стоковую, т.к. она длиннее, чем в комплекте. (для Dio 68, для других не знаю)

About quality and texture
Отличное качество и исполнение, слайдеры сделаны хорошо и не заедают при использовании, выглядят очень долговечно, надеюсь износостойкость на высоком уровне

About the feeling of use
После установки улучшилась динамика разгона, а также максимальная скорость, но все это благодаря установке нового ремня Daytona, нужно учитывать это, что вся трансмиссия должа быть в отличном состоянии

Products to buy together
В комплекте идут все неоходимые шайбы и инструкция, но нужно покупать ролики вариатора отдельно и осуществлять настройку под свою конфигурацию

Difficulty of installation
Никаких сложностей не возникло, инструкция есть в комплекте, все описано подробно, между вариатором и картером необходимо установить шайбу, чтобы компенсировать разницу между оригинальным вариатором и спортивным Daytona

Cost performance and comparison with other products
На данный момент это самый дешевый и качетственный вариатор, другие стоят на много дороже, но насколько они могут быть лучше - я не знаю

About shipping and packaging
Отличная заводская упаковка в блистере, а также хорошая доупаковка при отправке от Webike

Any concerns, cautions, or advice when purchasing
Покупая данный вариатор имейте в виду, что вам понадобится настройка, а значит необходимо купить ролики вариатора для тонкой настройки----------------------------------------------------------About Quality and TextureExcellent quality and performance, sliders are made well and do not seize when used, look very durable, I hope the wear resistance at a high levelAbout the Feeling of UseAfter the installation, the acceleration dynamics, as well as the maximum speed, but all this is due to the installation of the new Daytona belt, you need to consider this that the entire debt transmission is in excellent conditionProducts to Buy TogetherThe kit includes all the ineffective goals and instructions, but you need to buy variator videos separately and configure your configurationDifficulty of InstallationThere were no difficulties, the instruction is in the kit, everything is described in detail, between the variator and the carder it is necessary to set the puck to compensate for the difference between the original variator and sports daytonaCOST Performance and Comparison with Other ProductsAt the moment, this is the cheapest and most promoted variator, others are much more expensive, but how much they can be better - I don't knowABOUT SHIPPing and PACKAGINGGreat factory packaging in the blister, as well as a good dopakovka when sending from WebikeAny Concerns, Countions, Or Advice When PurchacingWhen buying this variator, keep in mind that you will need configuration, which means you need to buy a variator for thin tuningPowered by Google Translator

1.I replaced it while servicing a ZOOMER with 2000 km on it. The original weight roller was a little worn. Since my ZOOMER is equipped with DAYTONA products in various parts, I chose DAYTONA for the pulley as well. The removal and installation required the so-called Universal holder. This is the first time for me to do customization and maintenance of this part, so I was a bit concerned. I had never done customization and maintenance of this part before, so I was very careful, but I think anyone can do it if they know how it works. This product does not come with a weight roller, so you will need to purchase one that fits your ZOOMER. I installed 5.5g×3 and 6g×3 on my ZOOMER. After installation, the maximum speed increased from 63km/h to 69km/h.

I used it for CYGNUSX (1YP2).Quantity:Use the Ramp Plate as shown in the instruction manual with a Weight of 11g.
I sanded and installed the BALI of The setteIng of the satisfaction was out there, but it was 9800 at the highest speed.
It was about 9200 rpm, so I thought I would lower the rpm and do the same etc., but I achieved it at about 9200 rpm as I aimed.
The engine body was NORMAL except for the Takekawa Power Silent Oval Exhaust System, so I decided to go with the Pulley.
It seems to be good that the body itself is not too light. I will install their reinforced V Belt in the future, so I am looking forward to the change.
I think Matching is good for 1YPNormal engine. (I also referred to other Site.)